634635
3
Zoom out
Zoom in
Previous page
1/7
Next page
8
Arrange the cord in such a way that it cannot be damaged
by sharp edges or contact with hot surfaces (e.g. electric
hot plates).
The appliance gives o heat. After positioning the appli-
ance on the worktop, leave a space of at least 3 cm be-
tween the surfaces of the appliance and the side and rear
walls and at least 15 cm above the machine.
Connecting the appliance
Danger!
Check that the mains power supply voltage corresponds to that
indicated on the rating plate on the bottom of the appliance.
Connect the appliance to an eciently earthed and correctly
installed socket with a minimum current rating of 10A only. If
the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
professional.
FILLING THE WATER TANK
1. Open the water tank lid (g. 1), then take out the tank by
pulling upwards (g. 2).
2. Fill the tank with fresh clean water, taking care not to
exceed the MAX level. (g. 3). Replace the tank, pressing
lightly to open the valve located on the bottom of the tank.
3. More simply, the tank can also be lled without removing
it, pouring the water directly from a jug.
Important:
Never operate the appliance without water in the tank or with-
out the tank.
Please note:
It is normal for there to be water in the space under the tank.
This should therefore be dried regularly with a clean sponge.
SETTING UP THE APPLIANCE
1. Turn the appliance on by pressing the ON/OFF button (g.
4): the power light I comes on.
2. Insert the required coee lter (1 or 2 cups) (g. 5) in the
lter holder.
3. Attach the lter holder onto the machine without lling it
with ground coee (g. 6).
4. Place a 0.5 litre container under the boiler outlet and
another 0.5 litre container under the cappuccino maker
(g.7).
5. Wait for the OK light to come on (g. 8), then immediately
press the coee button (g. 7) and let about half the tank
discharge from the boiler outlet.
6. Then turn the steam dial anti-clockwise (g. 10) and dis-
charge all the water remaining in the tank from the cap-
puccino maker.
7. Close the steam valve and to interrupt delivery of hot
water, press the coee button again.
8. Empty the two containers and replace them under the
boiler outlet and the cappuccino maker and repeat points
5-6-7.
The appliance is ready for use.
Auto-o
If the appliance is not used for a certain period of time (which
varies according to the model), it turns o automatically (the
power light turns o).
Tips for a hotter coee
To make espresso coee at the right temperature, the coee
maker should be preheated as follows:
1. Turn the appliance on by pressing the ON/OFF button (the
ON/OFF light comes on) (g. 4) and attach the lter holder
to the appliance without adding pre-ground coee (g. 6).
2. Place a cup under the lter holder. Use the same cup as will
be used to prepare the coee in order to preheat it.
3. Wait for the OK light to come on (g. 8), then immediately
press the coee dial (g. 9). Allow the water to ow out
until the OK light goes out, then interrupt delivery by
pressing the coee button again.
4. Empty the cup. Wait until the OK light comes on again then
repeat the same operation.
(It is normal for a small and harmless pu of steam to be given
o when removing the lter holder).
HOW TO MAKE ESPRESSO COFFEE USING PRE
GROUND COFFEE
1. Place the ground coee lter in the lter holder (g. 5). To
make one coee, use the lter with the symbol
on the bottom, to make two coees, use the lter with the
symbol on the bottom.
2. To make just one coee, place one level measure of pre-
ground coee (about 7 g) in the lter (g. 10). To make two
coees, place two loosely lled measures (about 7+7 g) of
pre-ground coee in the lter. Fill the lter a little at a time
to prevent the pre-ground coee from overowing.
Important: for correct operation, before lling with pre-ground coee,
make sure there are no coee residues left in the lter from the last time you made
coee.
3. Distribute the pre-ground coee evenly and press lightly
with the presser (g. 11). Correct pressing of the pre-
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi Icona Vintage EcoV 311 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Icona Vintage EcoV 311 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Icona Vintage EcoV 311

DeLonghi Icona Vintage EcoV 311 Additional guide - English - 6 pages

DeLonghi Icona Vintage EcoV 311 User Manual - German - 7 pages

DeLonghi Icona Vintage EcoV 311 User Manual - Dutch - 7 pages

DeLonghi Icona Vintage EcoV 311 User Manual - French - 7 pages

DeLonghi Icona Vintage EcoV 311 User Manual - Italian - 7 pages

DeLonghi Icona Vintage EcoV 311 User Manual - Spanish - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info