769999
23
Zoom out
Zoom in
Previous page
1/24
Next page
23
PROBLEM POSSIBLE CAUSE REMEDY
The coee is delivered too
slowly or a drop at a time.
The coee is ground too nely. Turn the grinding adjustment dial (A5) one
click clockwise towards "7" while the coee
mill is in operation (g. 7). Continue one click
at a time until coee delivery is satisfactory.
The eect is only visible after delivering 2
coees (see section “13.1 Adjusting the coee
mill”).
The appliance will not make
coee
The appliance has detected impurities in its
internal circuits.
Wait for the appliance to be ready again and
reselect the required beverage. Contact cus-
tomer services if the problem persists.
Coee does not come out of
one or both spouts.
The coee spouts (A9) are blocked. Clean the nozzles with a cloth. Any encrusted
deposits can be removed with a toothpick, if
necessary.
The infuser (A20) cannot be
removed
The appliance has not been turned o correctly Turn the appliance o by pressing the
button (A7) g. 6) (see section “5. Turning the
appliance o”).
At the end of descaling, the
appliance requests a third
rinse
During the two rinse cycles, the water tank has
not been lled to the MAX level.
Follow the instructions displayed by the appli-
ance, but rst empty the drip tray (A15) to avoid
the water overowing.
The frothed milk has large
bubbles
The milk is not cold enough or is not
semi-skimmed.
Use skimmed or semi-skimmed milk at refrig-
erator temperature (about 5°C). If the result is
not as you wished, try changing brand of milk.
The froth adjustment dial (D1) is incorrectly
adjusted.
Adjust following the instructions in section
“14.2 Adjusting the amount of froth”
The milk container lid (D2) or froth adjustment
dial (D1) are dirty
Clean the milk container lid and control knob
as described in the section “16.10 Cleaning the
milk container”.
The hot water connection nozzle (A8) is dirty Clean the connection nozzle as described in
section “16.11 Cleaning the hot water nozzle
The milk does not come out of
the milk spout (D5)
The lid (D2) of the milk container lid is dirty Clean the milk container lid as described in sec-
tion “16.10 Cleaning the milk container”
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM350.50 - Dinamica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM350.50 - Dinamica in the language / languages: English as an attachment in your email.

The manual is 9.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM350.50 - Dinamica

DeLonghi ECAM350.50 - Dinamica User Manual - German - 28 pages

DeLonghi ECAM350.50 - Dinamica User Manual - Dutch, Danish - 168 pages

DeLonghi ECAM350.50 - Dinamica User Manual - French, Italian - 4 pages

DeLonghi ECAM350.50 - Dinamica User Manual - Portuguese, Swedish, Spanish, Norwegian, Finnish - 168 pages

DeLonghi ECAM350.50 - Dinamica Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info