770018
10
Zoom out
Zoom in
Previous page
1/13
Next page
15
11. Empty the container used to collect the rinsing water. Re-
move the water tank, replace the water softener lter (if
removed previously), ll the tank up to the MAX level with
cold water and insert in the appliance. The steam
light ashes.
12. Place the container used to collect the rinsing water empty
under the cappuccino maker;
13. Turn the steam/hot water dial to the I position. Rinsing
continues from the cappuccino maker only.
14. When it nishes, the steam light ashes on the con-
trol panel. Turn the steam/hot water dial to the 0 position.
15. Top up the water tank with fresh water to the MAX level
and put back in the machine.
The descaling cycle is now complete.
Please note!
If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
After descaling, it is normal for the grounds container
(A13) to contain water;
If the water tank has not been lled to the MAX level, at
the end of descaling, the appliance requests a third rinse to
guarantee that the descaler solution has been completely
eliminated from the machine's internal circuits.
18. SETTING WATER HARDNESS
Descaling is necessary after a period of operation established
according to the water hardness set.
The machine is set by default for a hardness level of 4. The ma-
chine can also be programmed according to the hardness of the
mains water in the various regions so that the machine needs to
be descaled less often.
18.1 Measuring water hardness
1. Remove the TOTAL HARDNESS TEST” indicator paper (C1)
from its pack (attached to the English instructions);
2. Immerse the paper completely in a glass of water for one
second;
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level;
Indicator paper Water
hard-
ness
Corresponding
setting
low
medium
high
maxi-
mum
18.2 Setting water hardness
1. Make sure the appliance is o (but connected to the mains
electricity supply and with the main switch (A6) in the I
position);
2. Press and hold the button (B5) for at least 5 seconds.
The , , and lights come on together;
3. Press the button (B2) to set the actual water hardness
(as measured by the indicator paper - see table in previous
section).
4. Press the / button (B9) to conrm the selection.
The machine is now reprogrammed with the new water hard-
ness setting.
19. TECHNICAL DATA
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1450W
Pressure: 1.5MPa (15 bars)
Max. water tank capacity: 1.8 l
Size LxDxH: 240x440x360 mm
Cord length: 1150 mm
Weight: 9.2 kg
Max. beans container capacity: 250 g
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM230.13 - Magnifica S Smart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM230.13 - Magnifica S Smart in the language / languages: English as an attachment in your email.

The manual is 5.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM230.13 - Magnifica S Smart

DeLonghi ECAM230.13 - Magnifica S Smart User Manual - German - 15 pages

DeLonghi ECAM230.13 - Magnifica S Smart User Manual - Dutch - 15 pages

DeLonghi ECAM230.13 - Magnifica S Smart User Manual - French - 15 pages

DeLonghi ECAM230.13 - Magnifica S Smart User Manual - Italian - 15 pages

DeLonghi ECAM230.13 - Magnifica S Smart User Manual - Spanish - 15 pages

DeLonghi ECAM230.13 - Magnifica S Smart Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info