532860
12
Zoom out
Zoom in
Previous page
1/16
Next page
17
9� Press the button to confirm introduc-
tion of the solution� The light flashes
telling you to turn the steam knob�
10� Turn the steam knob to the I position
The descaling programme starts and the
descaler liquid comes out of the cappuccino
maker
The descale programme automatically per-
forms a series of rinses and pauses to re-
move limescale deposits from inside the
machine�
After about 30 minutes, the water tank is empty
The OK and lights come on and the
light flashes�
11� Empty the container used to collect the des-
caler solution and replace it under the cap-
puccino maker
12� Remove the water tank, empty, rinse under
running water, fill with clean water and re-
place� The light goes off�
13� Hot water comes out of the cappuccino mak-
er
14� When the water tank is completely empty,
is displayed�
15� Turn the knob to the 0 position, insert the
filter (if present), fill the water tank and the
appliance is ready for use�
SETTING WATER HARDNESS
The light is displayed after a period of time
established according to the water hardness set�
The machine is factory set for a hardness value
of 4� The machine can also be programmed ac-
cording to the hardness of the mains water in the
various regions so that the machine needs to be
descaled less often�
Measuring water hardness
1� Remove the “TOTAL HARDNESS TEST” indi-
cator paper attached to this manual from its
pack�
2� Immerse the paper completely in a glass of
water for one second�
3� Remove the paper from the water and shake
lightly
After about a minute, 1, 2, 3, or 4 red squares
form, depending on the hardness of the wa-
ter� Each square corresponds to one level�
Level 1
Level 2
Level 3
Level 4
Set water hardness
1� Press the P button to enter the menu�
2� Turn the selector knob until the light is
selected�
3� Confirm the selection by pressing the
button�
4� Turn the selection knob and set the level
shown by the indicator paper (see previous
paragraph)�
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
5� Press the button to confirm the setting�
6� Press the button to exit the menu�
The machine is now reprogrammed with the new
water hardness setting�
WATER SOFTENER FILTER
Certain models are fitted with a water softener
filter If this is not the case with your model,
you are recommended to purchase one from
De’Longhi Customer Services�
To use the filter correctly, follow the instructions
below
Installing the filter
1� Remove the filter from the packaging�
2� Turn the date indicator disk (see fig� 30) until
the next 2 months of use are displayed�
Please note:
The filter lasts about two months if the appliance
is used normallyIf the coffee maker is left un-
used with the filter installed, it will last a maxi-
mum of three weeks�
3� Remove the tank from the appliance and fill
with water
4� Insert the filter in the water tank and im-
merse it completely, sloping it to enable the
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM23.210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM23.210 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM23.210

DeLonghi ECAM23.210 User Manual - German - 18 pages

DeLonghi ECAM23.210 User Manual - Dutch - 22 pages

DeLonghi ECAM23.210 User Manual - French - 18 pages

DeLonghi ECAM23.210 Quick start guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info