586440
21
Zoom out
Zoom in
Previous page
1/22
Next page
26
PROBLEEM MOGELIJKE OORZAAK OPLOSSING
De koe is niet heet. De kopjes zijn niet voorverwarmd. De kopjes met heet water verwarmen (gebruik
de heetwarmwaterfunctie);
De afgiftegroep zetgroep is afgekoeld
omdat er 2/3 minuten zijn verstreken
na het zetten van het laatste kopje
koe.
Vóór het koezetten, eerst de zetafgiftegroep
laten opwarmen door te spoelen met de daar-
voor bestemde functie
(vedi par. “8.1 Spoelen”).
De ingestelde temperatuur van de kof-
e is laag.
Vanuit het menu een hogere temperatuur voor
de koe instellen (zie par. “8.9 Instellen van de
temperatuur”).
De koe is erg slap of heeft een
dunne schuimlaag.
De koe is te grof gemalen. Herhaal de koeafgifte en draai de regelknop
voor de maling (A5) (afb. 13) met 1 klik met de
wijzers van de klok mee terwijl de koemolen
in werking is. Draai de knop iedere keer met
één klik een tikje tot de juiste afgifte bereikt
is. Het eect is pas zichtbaar na het zetten van
2 kopjes koe (zie par. ). “9.4 De koemolen
instellen”).
De koe is niet lekker. Gebruik koe die geschikt is voor
espressoapparaten.
De koe loopt er te langzaam of komt
er druppelsgewijs uit.
De koe is de te jn gemalen. Draai de regelknop voor de maling (A5) met
één klik met de wijzers van de klok mee naar
nummer 7 terwijl de koemolen in werking
is (afb. 13). Draai de knop iedere keer met één
klik een tikje tot de juiste afgifte bereikt is.
Het eect is pas zichtbaar na het zetten van
2 kopjes koe (zie par. ). “9.4 De koemolen
instellen”).
De koe komt niet uit één of beide
mondstukken uitlopen van het
afgifteblok.
De mondstukken uitlopen van het kof-
eafgifteblok (A7) zitten verstopt.
Reinig de mondstukken uitlopen indien zono-
dig met een tandenstoker (afb. 31).
Het apparaat gaat niet aan De stekker (C7) van de voedingskabel
zit niet goed in het stopcontact.
Steek de stekker goed in het de contactingang
punt van het apparaat
(afb. 1).
De stekker zit niet in het stopcontact. Steek de stekker in het stopcontact (afb. 1).
De hoofdschakelaar (A20) staat niet
aan.
Druk de hoofdschakelaar in (afb. 2).
De zetafgiftegroep zit vast Hij is niet correct uitgeschakeld
Schakel uit door op de knop (B1)
te drukken
(zie hfd. “7. Uitschakelen van het apparaat”).
19. OPLOSSEN VAN PROBLEMEN
Hieronder worden enkele mogelijke defecten genoemd.
Als het probleem niet opgelost kan worden zoals wordt aangegeven, dient u contact op te nemen met de Technische Dienst.
21


Need help? Post your question in this forum.

Forumrules
1

Forum

delonghi-ecam-44.660

Reset search

  • How can reset 44.660? It display a repetative message.. Submitted on 16-4-2023 at 16:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 44.660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 44.660 in the language / languages: Dutch as an attachment in your email.

The manual is 4.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 44.660

DeLonghi ECAM 44.660 User Manual - English - 23 pages

DeLonghi ECAM 44.660 User Manual - German - 26 pages

DeLonghi ECAM 44.660 User Manual - French - 20 pages

DeLonghi ECAM 44.660 User Manual - Italian - 27 pages

DeLonghi ECAM 44.660 User Manual - Spanish - 21 pages

DeLonghi ECAM 44.660 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info