687064
3
Zoom out
Zoom in
Previous page
1/20
Next page
8
2.4 Description of the accessories (page 2 - D)
D1. "Total Hardness Test" indicator paper (attached to page 2
of the English instructions)
D2. Pre-ground coee measure
D3. Descaler
D4. Water softener lter (certain models only)
D5. Cleaning brush
D6. Hot water spout
D7. Power cord
2.5 Description of the milk container (page 2 - E)
E1. Froth adjustment and CLEAN dial
E2. Milk container lid
E3. Milk container
E4. Milk intake tube
E5. Frothed milk spout (adjustable)
3. SETTING UP THE APPLIANCE
Please note!
The rst time you use the machine, the water circuit is
empty and the appliance could be very noisy. The noise
becomes less as the circuit lls.
Coee has been used to factory test the appliance and it
is therefore completely normal for there to be traces of
coee in the mill. The machine is, however, guaranteed to
be new.
You should customise water hardness as soon as possible
following the instructions in section "15. Setting water
hardness".
1. Insert the power cable connector (D7) into the socket (A21)
at the back of the appliance and connect the appliance to
the mains electricity supply (g. 1). Make sure the main
switch (A22) at the back of the appliance is pressed (g. 2);
2. "SELECT LANGUAGE": Press and hold until
the required language appears on the display, then press
the ag corresponding to the language.
Follow the instructions indicated on the appliance display:
3. "FILL TANK WITH" "FRESH WATER": remove the water tank
(A17) (g. 3), ll to the MAX line (marked on the tank) with
fresh water (g. 4, then put the tank back in the appliance
(g. 5);
4. "INSERT WATER SPOUT": Check that the hot water spout
(D6) is inserted on the connection nozzle (A8) (g. 6) and
place a container holding a minimum of 100 ml under-
neath (g. 7);
5. "WATER CIRCUIT EMPTY" "PRESS OK TO START": press
to conrm. The appliance delivers hot
water from the spout (g. 8) then goes o automatically.
The coee machine is now ready for normal use.
Please note!
The rst time you use the appliance, you need to make 4-5
cappuccinos before it starts to give satisfactory results.
When making the rst 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
To improve the performance of your appliance, we recom-
mend installing a water softener lter (D7) as described
in section "16. Water softener lter". If your model is not
provided with a lter, you can request one from De'Longhi
Customer Services.
4. TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch
(A22) is pressed (g. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle.
To turn the appliance on, press the button (A15) (g.
8). The message "HEATING UP UNDERWAY" "PLEASE WAIT"
appears on the display.
When heating is complete, the message changes to:
"RINSING UNDERWAY" "PLEASE WAIT". As well as heating
the boiler, this also heats the internal circuits by circulating
hot water.
The appliance is ready for use when the main screen (home-
page) appears.
5. TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
To turn the appliance o, press the button (A15) (g.
8).
The message
"TURNING OFF UNDERWAY" "PLEASE WAIT"
appears on the display, then (if envisaged) the appliance
performs a rinse cycle and goes o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
rst turn the appliance o by pressing the button
(g. 8);
release the main switch (A22) at the back of the appliance
(g. 2).
Important!
Never press the main switch while the appliance is on.
3


Need help? Post your question in this forum.

Forumrules
1

Forum

delonghi-ecam-370.95-t-dinamica-plus

Reset search

  • Coffee with preground beans
    How to proceed further after putting putting the coffee powder as there is no ok button Submitted on 13-4-2021 at 09:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 370.95 T Dinamica Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 370.95 T Dinamica Plus in the language / languages: English as an attachment in your email.

The manual is 8.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 370.95 T Dinamica Plus

DeLonghi ECAM 370.95 T Dinamica Plus User Manual - German - 22 pages

DeLonghi ECAM 370.95 T Dinamica Plus User Manual - Dutch, Danish - 386 pages

DeLonghi ECAM 370.95 T Dinamica Plus User Manual - French - 21 pages

DeLonghi ECAM 370.95 T Dinamica Plus User Manual - Polish, Portuguese, Swedish, Turkish, Spanish, Finnish - 386 pages

DeLonghi ECAM 370.95 T Dinamica Plus User Manual - All languages - 386 pages

DeLonghi ECAM 370.95 T Dinamica Plus Quick start guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info