562587
21
Zoom out
Zoom in
Previous page
1/22
Next page
20
TROUBLESHOOTING

If the problem cannot be resolved as described, contact customer services.
PROBLEM POSSIBLE CAUSE SOLUTION
The coee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot water.

The infuser has cooled down because 2/3 mi-
nutes have elapsed since the last coee was
made.
-
sing the button.
A low coee temperature is set.
Set a high coee temperature in the menu.
The coee is weak or not cre-
amy enough.
The coee is ground too coarsely.
Turn the grinding adjustment dial one click
anticlockwise towards “1” while the coee mill
is in operation (g. 8). Continue one click at a
time until coee delivery is satisfactory. The
eect is only visible after delivering 2 coees
(see the section: Adjusting the coee mill” on
page 11).
The coee is unsuitable.
Use pre-ground coee for espresso machines
only.
The coee is delivered too
slowly or in drops.
The coffee is ground too finely.
Turn the grinding adjustment dial one click
clockwise towards “7” while the coee mill is
in operation (g. 8).
Continue one click at a time until coee delive-
ry is satisfactory.
The eect is only visible after delivering 2
coees (see the section: Adjusting the coee
mill” on page 11).
Coee does not come out of
one or both of the spouts.
The spouts are blocked. Clean the spouts with a toothpick.
The milk does not come out of
the milk spout.
The milk container lid is dirty. Clean the milk container lid as described in the
section “Cleaning the milk container”.
The milk contains large bub-
bles and squirts out of the milk
spout or there is little froth.
The milk is not cold enough or is not
semi-skimmed.
Use skimmed or semi-skimmed milk at refrige-
rator temperature (about 5° C).
If the result is not as you wished, try changing
brand of milk.
The froth adjustment dial is incorrectly
adjusted.
Adjust following the instructions in the section
“Making cappuccino and milk based drinks”.
The milk container lid or froth adjustment dial
are dirty
Clean the milk container lid and dial as de-
scribed in the section “Cleaning the milk
container”.
The hot water/steam nozzle is dirty Clean the nozzle as described in the section
“Cleaning the hot water/steam nozzle.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ECAM 22.360 - MAGNIFICA S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ECAM 22.360 - MAGNIFICA S in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ECAM 22.360 - MAGNIFICA S

DeLonghi ECAM 22.360 - MAGNIFICA S User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info