652302
10
Zoom out
Zoom in
Previous page
1/12
Next page
Built-In Cabinet Installation
Parts Supplied:
The built-in cabinet shall not have a rear wall
behind the appliance.
Minimum installation height is 85cm.
Do not cover ventilation slots and air intake
points.
Page 10
Installation
Page 15
Bottom
Brackets
Screw A
Adjust Screw B
Screw C
(45)
(45)
560
550
min
450
600
+2
+8
Prepare the Cabinet
1. Read the instructions on the Bottom
Cabinet Template, put the template on the
bottom plane of the cabinet.
2. Make marks on the bottom plane of the
cabinet according to the marks “a” of the
template.
Convection
Cooking
(Without
pre-
heating function)
1. Press the “CONVECTION” key once,
“140” will flash.
2. Keep pressing “CONVECTION” or turn
to select the convection function.
Note: the temperature can be chosen
from 140 degrees to 230 degrees.
3. Press the “START/+30SEC./CONFIRM”
to confirm the
temperature
4. Turn to adjust the cooking time. (The
maximum setting time is 95 minutes.)
5. Press the “START/+30SEC./CONFIRM”
key to start cooking.
Multi-Stage Cooking
A maximum of two stages can be set. If one
stage is defrosting, it should be put in the first
stage. The buzzer will ring once
after each
stage and the next stage will begin.
Note: Auto menu and preheating cannot be
set as one of the multi-stage.
Example:
if you want to defrost the food for
5 minutes, then to cook with 80%
microwave
power for 7 minutes. The steps are as
follows:
1. Press “W.T./TIME DEFROST”
twice, the
screen will display “dEF2”.
2. Turn to adjust the defrost time to 5
minutes.
3. Press “MICROWAVE” once.
4. Turn to choose 80% microwave
power till “P80” will display.
5. Press “START/+30SEC./CONFIRM” to
confirm.
6. Turn to adjust the cooking time to 7
minutes.
7. Press “START/+30SEC./CONFIRM” to
start cooking.
Pre-set Function
1. Set the clock first. (Refer to section ‘clock
setting’.)
2. Select the cooking program. A maximum
of two stages can be set. Defrosting
should not be set in preset function. Auto
menu can be set single stage only.
Example: if you want to cook with 80%
microwave power for 7 minutes.
a) Press “MICROWAVE” once.
b) Tu r n to choose 80% microwave
power till “P80” will display.
c) Press “START/+30SEC./CONFIRM” to
confirm.
d) Tur n
to adjust the cooking time to
7 minutes.
After the above steps, please do not
press “START/+30SEC./CONFIRM”.
Then
do as follows:
3. Press “CLOCK/PRE-SET”, current time
displays and the hour figures flash.
4. Turn to adjust the hour figures, the
input time should be within 0--23 (24-
hour) or 1--12 (12-hour).
5. Press “CLOCK/PRE-SET”, the minute
figures will flash.
6. Turn to adjust the minute figures,
the
input time should be within 0--59.
7. Press “START/+30SEC./CONFIRM” to
finish setting. “:” will flash & timer
countdown begins. Buzzer will ring twice
to
indicate
cooking
time has
commenced.
Note: Clock must be set first. Otherwise,
pre-set function will not work.
Using Your Combi Oven
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi DE60COMBI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi DE60COMBI in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info