Manual DeLonghi BCO420 (page 8 of 8) (English)

465798

Zoom out

Zoom in

1/8

Troubleshooting - Electrical connection

Problem Possible causes Solution

The milk does not froth when making a

cappuccino

The milk is not cold enough Always use milk at fridge temperature

The milk-frother is dirty Clean the small holes in the milk-frother very

carefully, particularly those indicated in g. 27

The lter or espresso coee has an acidic

avour

Insucient rinsing after the de-scaling operation Rinse the appliance as described in the chapter

“De-scalingoftheltersection”or“De-scalingofthe

espressosection”

The time taken to percolate the lter cof-

fee is getting longer

The coee-maker lter needs de-scaling Carry out the de-scaling procedure as described in

theparagraph“De-scalingoftheltercoeesection”

Electrical connection (UK only)

Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt

about your supply contact your local electricity company.

The exible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity. Should this plug not t the socket outlets

in your home, it should be cut o and replaced with a suitable plug, following the procedure outlined below.

Note: Such a plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might nd it and

plug it into a supply socket - with the obvious consequent danger.

N.B. We recommend the use of good quality plugs and wall sockets that can be switched o when the machine is not in use.

IMPORTANT: the wires in the mains lead tted to this appliance are coloured in accordance with the following code:

green and yellow earth

blue neutral

brown live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug,

proceed as follows:

- The wire which is coloured green and yellow must be connected to the terminal in the plugwhichismarkedwiththeletterEorbytheearth

symbol or coloured green or green and yellow.

- The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

- ThewirewhichiscolouredbrownmustbeconnectedtotheterminalwhichismarkedwiththeletterLorcolouredred.

Whenwiringtheplug,ensurethatallstrandsofwirearesecurelyretainedineachterminal.Donotforgettotightenthe mains lead

clamp on the plug. If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a qualied electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualied electrician and should only be replaced

with a exible cord of the same size.

After replacement of a fuse in the plug, the fuse cover must be retted. If the fuse cover is lost, the plug must not be used until a replacement cover is

obtained. The colour of the correct replacement fuse cover is that of the coloured insert in the base of the fuse recess or elsewhere on the plug. Always

state this colour when ordering a replacement fuse cover.

Only 13amp replacement fuses which are asta approved to B.S. 1362 should be tted.

ThisapplianceconformstotheNormsEN55014regardingthesuppressionofradiointerference.

Warning - this appliance must be earthed

Green and Yellow to Earth

13 amp

Fuse

Brown to

live

Cord Clamp

Blue to

neutral

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi BCO420 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi BCO420

DeLonghi BCO420 User Manual - German - 8 pages

DeLonghi BCO420 User Manual - Dutch - 8 pages

DeLonghi BCO420 Quick start guide - All languages - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi BCO420 Manual

Product: