555554
5
Zoom out
Zoom in
Previous page
1/48
Next page
5
GB
6. MAINTENANCE
Always disconnect the apparatus before carrying
out inspection or cleaning. Never use water or other
liquids to clean the electrical parts of the hot air gun.
Never use easy in ammable liquids for cleaning the
hot air gun, especially for the mouthpiece.
Regular maintenance of your hot air gun prevents
un necessary problems. Keep the ventilation slots of
the hot air gun clean to prevent overheating.
7. TROUBLESHOOTING
In case the hot air gun does not work well, we give you
subjoined some possible causes and their solutions.
1. The engine gets overheated.
The ventilation slots of the hot air gun are dirty.
- Clean the ventilation slots.
2. The hot air gun does not start when it is switched
on.
Interruption in the electrical circuit.
- Check the mains lead and the mains plug. The switch
is defective.
Pull the mains lead out of the wall socket, because
there is a chance of re risk! Have the hot air gun
repaired at your local SBM Group dealer.
3. The engine does not work, but it does heat.
Interruption in the electrical circuit.
Pull the mains lead out of the wall socket, because
there is a chance of re risk! Have the hot air gun
repaired at your local SBM Group dealer.
2. INSTALLATION
You can work manually with this hot air gun or you can
put it in a vertical position. If you use the vertical posi-
tion the metal suspension bracket of the handgrip must
also stand vertical for supporting the handgrip on the
correct place.
3. USING THE APPLIANCE
THE HOT AIR GUN CAN BE USED FOR:
plumbing work like tube connections, solder, bow-
ing tubes;
removing paint, varnish and lacquer without re-
risk;
quickly drying of appliances which have become
wet;
drying surfaces for quick repairing;
removing self-adhesive labels in a clean way;
placing PVC labels;
blistering after sticking PVC materials can be
smoothed after heating;
easy removing of vinyl carpeting;
forming all synthetics with a low temperature
among which polyethylene and PVC;
forming all synthetics with a high temperature
among which acryl and plexiglass;
smelting synthetics, among which matters and foils
with PVC layer;
applying heat shrinking tubes;
• shrink wrappers;
thawing tubes and engines;
• repairing nishing layers: email of bath and house-
hold appliances;
applying epoxy powder cover layers;
repairing of ski’s, surf-boards and other sports
goods;
unscrewing too fast xed screws and connections.
4. BEFORE OPERATING
Before you switch on the hot air gun you have to search
for the right adapter for the mouthpiece and assemble it
on the mouthpiece if it is still cold.
IMPORTANT: Replace the mouthpiece only:
with a stationary engine;
when the appliance is disconnected;
when the mouthpiece is cold.
5. OPERATION
Check if the mains switch is on position “0” before
you connect the apparatus;
Keep the power voltage always away from the hot
air stream and the mouthpiece.
Tip: If you want to get the best result, test all appli-
ances on a little part of the workpiece.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Defort DHG-1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Defort DHG-1600 in the language / languages: All languages as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info