348
19
Zoom out
Zoom in
Previous page
1/20
Next page
19
Press button B to indicate the current setting.
1 flash = Function is not selected
2 flashes = Panic function is active when buttons A and B are held simultaneously (standard)
3 flashes = Panic function is activated for 30 seconds after buttons A and B were
held simultaneously. The buttons can be released in the meantime.
Press button B again to select the next function. The number of confirmation signals indicates the
current status.
Function 12: Factory settings
The following settings are provided ex works:
Function 3: Alarm sound no. 1
Function 4: Active arming
Function 6: Programming of all functions (setting 3)
Function 7: Activation time of Central Locking; 0.5 seconds
Function 8: Security function not selected
Function 9: Start lock selected (821). Immobilizer selected (823)
Function 10: Convenience closing; OFF
Function 11: Panic function, active for as long as A and B buttons are held
If the actual settings differ from the factory settings, they can be reset to the above settings by pressing
button B.
Function 13: Entry of PIN code in Immobilizer Unit
If an Immobilizer module is retrofitted or replaced, the PIN code must be entered into the alarm to
allow the vehicle to be started.
1. Press button B
2. Switch ignition OFF
3. Switch ignition ON, allow LED to flash the same number of time as the first digit of the Immobilizer
PIN code
4. Switch ignition OFF
5. Repeat points 3 and 4 until you have entered all of the digits of your PIN code. When the ignition is
switched off for the last time, the LED will flash rapidly. This means that you have completed the
coding.
6. If you make a mistake, you will have to restart the procedure from the beginning.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Defa 800 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Defa 800 series in the language / languages: Dutch as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info