Présentation de votre lave-vaisselle
64
EN
What to do before using the machine for the first time
STEP 1: Adjusting the water softener
For impeccable washing and drying results with no streaks.
The water softener must be adjusted correctly to ensure no streaks
after washing and drying.
Your dishwasher is fitted with a water softening system that operates
using regenerating salt.
You must set the water softener according to the hardness of the water
in your area.
Salt
required
Dureté d’eau > 70 °F
0 - 10°F
10 - 18°F
18 - 25°F
25 - 40°F
40 - 55°F
55 - 70°F
NO
YES
YES
YES
YES
YES
YES
Water softener
setting
Water
hardness
Testing strip
➁➁
-
Settings on the control panel
Press the “SET” button
to set the water soften-
er: a long press to
access the “settings”
and 3 short presses for
the water softener. The
water softener’s setting
is then shown on the
display.
• Press the Programmes button to change the setting
• The setting is confirmed automatically after 10 seconds without having
to press the Programmes button again.
The display shows the water’s hardness in accordance with the above
table.
When the machine is first switched on, the setting is 10 - 25° ( on
the display)
.
You must fill the salt reservoir with water before
using the machine, even if the water softener setting
selected does not require any regenerating salt.
If you move house and take the dishwasher with you you will
need to check the water hardness and adjust accordingly.
For good wash results it is very important to set the dishwasher
to the correct level of water hardness and to set the correct
level of rinse aid.
➀➀
-
Measuring the water hardness
To do this: contact your local water supplier to find out the water
hardness level and adjust on the machine as described below.
