529050
8
Zoom out
Zoom in
Previous page
1/8
Next page
Days Healthcare Link Wheelchair
User Manual
Adjustment Procedures
Footrest Adjustments
Using the hexagon key provided, unscrew the screws lo-
cated on the rear of the footrest support tube (arrowed).
Slide the footrest inner tube up or down to the required
position and secure in using both screws.
Heel and Calf Straps
Your wheelchair is equipped with heel straps which are secured to the footplates
Backrest Height
The backrest tubes slide into the rear tube of each side frame through which each
has a screw and hand wheel to secure.
To adjust the backrest, remove both screws and adjust to the required height and
refit screws to secure.
Seat Belt (if fitted)
Hold the bayonet end in one hand, and pull on the webbing to increase or
decrease belt length with the other. When length is correct, adjust slide buckle to
suit.
Adjustable anti-tippers
These are fitted at the rear of the chair, adjacent to the rear wheels
Days recommends that these are fitted and correctly adjusted to the individuals
needs, especially when climbing kerbs and gradients.
To adjust, using forefinger and thumb ease the steel washer (arrowed) until the
tube can be moved to the desired position, release the washer to
lock the tube. To ensure the tube is secure try to move the tube, if
it is not locked it will move until it automatically locks with an
audible click.
- 8 -
Operations of Use
Footrests
Your footrests are capable of being rotating inwards and out-
wards. To achieve this pull the release lever (arrowed right) up-
wards and rotate footrest in the required direction. The footrest
may be removed whilst in either position but not whilst in the
normal central position (as pictured).
Armrests
Both armrests are swing-back and re-
movable. To operate, push the release
lever (a) and lift arm out of front socket.
Rotate arm through 90° to rear of chair.
To remove armrest pull plunger (b) and
hold whilst simultaneously pulling the
arm from the rear socket.
Refit in the reverse order.
Manual Brake
The parking brake (c) which is applied manually to the tyres whilst the chair is
parked or stationary. To apply the brake, move the lever until the locking bar is
locked firmly onto the tyre.
Folding Back
This is available to reduce the overall height of the chair to
allow easier transportation. Whilst at the rear of the chair,
grip the small lever (arrowed opposite) and pull away from
the chair to release the pin allowing the handle section to be
folded down.
Folding the Chair
Remove the seat cushion (if fitted). The wheelchair is folded by grasping the seat
canvas at the front centre with one hand and at the rear with the other. A simple
lifting action will draw both sides of the chair together into the folded position.
- 9 -
a
b
c
Illustration shows TR model
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Days Link TR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Days Link TR in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info