702878
55
Zoom out
Zoom in
Previous page
1/56
Next page
51
Appendix C
Wireless Repeater Configuration
Vantage Pro2 Wireless Repeaters (#7626, #7627) or Long-Range Wireless Repeaters (#7653,
#7654) can be added to increase transmission distances or improve transmission quality
between a station and a console. A repeater receives information transmitted from a Vantage
Vue or Vantage Pro2 station and retransmits it to a console. Depending on transmission
distance, one repeater or several repeaters can be used to collect and retransmit weather data.
All consoles communicating with repeaters must be set up with the correct Transmitter ID and
Repeater ID before the console can correctly receive station information.
Setting Repeater ID
To set a repeater ID on the console:
1. Press 2ND and SETUP to enter Setup Mode.
2. Press DONE repeatedly to display Screen 6: Configuring Transmitter IDs.
See “Screen 6: Configuring Transmitter IDs” on page 9 for more information on configur-
ing Transmitter IDs.
3. Press 2ND and then WIND to turn the repeater function on and to select a repeater ID.
Pressing 2ND and WIND sets the console to receive the signal from a repeater instead of
directly from a station. The first Repeater ID displayed is repeater A.
4. Press WIND repeatedly to cycle through all eight repeater IDs or to clear the repeater ID in
the right-hand corner. When no repeater ID is shown, the console is configured to listen
directly to a station and not to a repeater.
In this example, the console is
set up to receive from an ISS
station on transmitter ID 1
from repeater A.
5. Continue pressing DONE to
move through the other
screens in the Setup Mode, or
press and hold DONE to return to the Current Weather Mode.
Clearing Repeater ID
If a repeater ID is being displayed in Screen 6 and you are not using a repeater, you must turn
off the repeater function to receive station information successfully.
In Setup Screen 6:
Press 2ND and then press WIND repeatedly so that the console cycles through the list of
repeater IDs (Repeaters A-H) until the section where the repeater ID was displayed is blank.
Press DONE to continue to the next screen or press and hold DONE to return to the Current
Weather Mode.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Davis DAV-6250EU Vantage Vue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Davis DAV-6250EU Vantage Vue in the language / languages: English as an attachment in your email.

The manual is 6,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Davis DAV-6250EU Vantage Vue

Davis DAV-6250EU Vantage Vue User Manual - English - 16 pages

Davis DAV-6250EU Vantage Vue Quick start guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info