Please do not adjust the date between 22.00 and 02.00 o'clock.
Setting the time
Pull out the crown (1) to position 2. Turn the crown (1) counter clockwise until the hour (A)
and minute (B) hands show the correct time. Push the crown (1) back to position 0.
Setting the date
Pull out the crown (1) to position 1. Turn the crown (1) counter clockwise to until the date
indicator (G) shows the correct date. Push the crown (1) back to position 0.
Using the chronograph
Start the chronograph by pressing button 2. By pressing button 2 again, the chronograph
will stop. The hands (M) and (L) will show the right time. By pressing button 3 the
chronograph will return to its starting position. If you press button 3 while the chronograph is
running, the chrono will automatically stop and return to its starting position.
Setting the starting position of the chronograph
Pull out the crown (1) to position 2. Both hands (M) and (L) will turn
to their initial starting positions. To change the starting position of hand (M), press button 2.
After setting hand (M) on the requested starting position push back the crown to position 0.
Warning: the starting position of hand (L) cannot be changed.
1. Couronne
2. Arrêt/marche chrono.
3. Remise a zéro chrono
A. Aiguille des heures
B. Aiguille des minutes
C. Aiguille des secondes
E. Aiguille 24 heures
G. Indication de la date
L. Aiguille des minutes du chrono
M. Aiguille des secondes du chrono
Il ne faut jamais changer la date entre 22.00 et 02.00 heures.
Réglage de l'heure
Tirez la couronne (1) en position 2. Tournez la couronne (1) contre le sens des
aiguilles d'une montre jusqu'à ce que les aiguilles (A) (B) indiquent l'heure correcte.
Repoussez la couronne (1) en position 0.
Réglage de la date
Tirez la couronne (1) en position 1. Tournez la couronne (1) contre le sens des aiguilles d'une
montre jusqu'à ce que la date correcte s'affiche dans la fenêtre (G). Repoussez la couronne (1)
en position 0.
Emploi du chronographe
Mettez en marche le chrono en appuyant sur le bouton (2). En appuyant une deuxième fois sur
le bouton 2 vous arrêtez le chrono. Appuyez sur le bouton (3) pour remettre le chrono dans
la position initiale. En appuyant sur le bouton 3 tandis que le chrono est encore en marche,
vous l'arrêterez automatiquement.
Réglage de la position initiale du chronographe
Tirez la couronne (1) en position 2. Les aiguilles du chrono se mettront alors dans leur
position initiale. En appuyant sur le bouton 2 vous changez la position de l'aiguille des
secondes du chrono (M) Après avoir réglé la position initiale, repoussez la couronne (1) en
position 0. Attention : il n'est pas possible de modifier la position initiale des aiguilles (L).
1. Krone
2. Start/Stopp Taste Chronograph
3. Reset Taste Chronograph
A. Stundenzeiger
B. Minutenzeiger
C. Sekundenzeiger
E. 24-Stunden Andeutung
G. Datumfenster
L. Minutenzeiger Chronograph
M. Sekundenzeiger Chronograph
Bitte niemals zwischen 22.00 und 02.00 Uhr das Datum Einstellen.
Einstellen der Uhrzeit
Ziehen Sie die Krone (1) bis zum zweiten Einrasten. Drehen Sie jetzt die Krone (1) gegen den
Uhrzeigersinn bis das gewünschte Uhrzeit erscheint. Drücken Sie die Krone (1) wieder
zurück nach Position 0.
Einstellen des Datums
Ziehen Sie die Krone (1) bis zum ersten Einrasten. Drehen Sie jetzt die Krone (1) gegen den
Uhrzeigersinn bis das gewünschte Datum im Datumfenster (G) erscheint. Drücken Sie die
Krone (1) wieder zurück nach Position 0.
Bedienung des Chronograph
Um den Chronograph zu starten betätigen Sie Taste 2. Zeiger (M) und (L) laufen jetzt rund.
Um den Chronograph wieder zu stoppen betätigen Sie nochmals Taste 2. Wenn Sie Taste 3
betätigen werden alle Zeiger wieder ruckgestellt nach ihren Null Position. Wenn Sie Taste 3
betätigen, während der Chronograph läuft, wird der Chronograph angehalten und automatisch
in seine Startposition rückgestellt.
Die Nullstellung des Chronographen wieder herstellen
Ziehen Sie die Krone (1) bis zum zweiten Einrasten. Betätigen Sie Taste 2 bis Chronograph
Sekundenzeiger (M) auf der Null Position steht. Zum Schluss drucken Sie die Krone (1)
wieder zurück nach Position 0. Der Chronograph ist jetzt funktionsbereit.
1. Kroon
2. Starten/stoppen chronograaf
3. Keuzeknop tijd/chronograaf
A. Uurwijzer
B. Minuutwijzer
C. Secondewijzer
E. 24 uur indicator
G. Datum indicator
L. Minuutwijzer chronograaf
M. Secondewijzer chronograaf
Veranderd u alstublieft nooit de datum tussen 22.00 en 02.00 uur.
Het instellen van de tijd
Trek de kroon (1) uit naar positie 2. Draai de kroon (1) tegen de klok in totdat de uur (A)
en de minuut (B) wijzers de juiste tijd weergeven. Druk de kroon (1) terug naar positie 0.
Het instellen van de datum
Trek de kroon (1) uit naar positie 1. Draai de kroon (1) tegen de klok in totdat de datum
indicator (G) de juiste datum weergeeft. Druk de kroon (1) terug naar positie 0.
Het gebruik van de chronograaf
Start de chronograaf door op knop (2) te drukken. Door nogmaals op knop (2) te drukken
stopt de chronograaf weer. Bij het stoppen zullen de wijzers (M) en (L) de jusite waarde
weergeven. Druk op knop (3) om de chrono terug te laten keren naar de uitgangspositie.
Wanneer u knop (3) indrukt terwijl de chrono nog loopt, zal deze automatisch worden gestopt.
Het opnieuw instellen van de uitgangspositie van de chronograaf
Trek de kroon (1) uit naar positie 2. De chronowijzers stellen zich nu in op de ingestelde
uitgangspositie. Door nu herhaaldelijk op knop (2) te drukken stelt u de secondewijzer van de
chrono (M) in opdat deze naar de 12 wijst. Druk de kroon (1) terug naar positie 0. De
chronograaf is nu opnieuw ingesteld. Attentie: De wijzer (L) kan niet versteld worden.
0881
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Davis 0881 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Davis 0881 in the language / languages: English, German, Dutch, French as an attachment in your email.
The manual is 0,1 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.