This watch has not an automatic movement and needs to be wound up every 24 hours.
Turn the crown clockwise to wind it up. .
Setting the time
Pull out the crown (1) to position 1. Turn the crown (1) clockwise until the hour (A)
and minute (B) hands show the correct time. Push the crown (1) back to position 0.
Using the chronograph
Start the chronograph by pressing button 2. By pressing button 2 again, the chronograph
will stop. The hands (M) and (L) will show the right time. To return the chronograph to its
starting position first always stop the chronograph by pressing button (2). After stopping press
button (3) to return the chonograph to its starting position.
IMPORTANT:
When pressing button (3) while chronograpf is still running, the movement will be damaged.
1. Couronne
A. Aiguille des heures
B. Aiguille des minutes
C. Aiguille des secondes
L. Aiguille des minutes du chrono
M. Aiguille des secondes du chrono
Cette montre n'est pas une montre automatique. Elle doit être remontéée toutes les 24 heures.
Pour cela, tournez le remontoir dans le sens des aiguilles d'une montre.
Réglage de l'heure
Tirez la couronne (1) en position 1. Tournez la couronne (1) dans le sens des
aiguilles d'une montre jusqu'à ce que les aiguilles (A) (B) indiquent l'heure correcte.
Repoussez la couronne (1) en position 0.
Emploi du chronographe
Mettez en marche le chrono en appuyant sur le bouton (2). En appuyant une deuxième fois sur
le bouton (2) vous arrêtez le chrono. Les aiguilles (M) et (L) indiqueront la valeur exacte.
Pour remettre le chrono dans la position initiale toujours arrééter le chrono en appuyant sur le
bouton (2). Aprèès l'arrêêt, appuyer sur le bouton 3 pour remettre le chrono dans sa position
initiale.
1. Kroon
A. Uurwijzer
B. Minuutwijzer
C. Secondewijzer
L. Minuutwijzer chronograaf
M. Secondewijzer chronograaf
Dit horloge is geen automaat en dient elke 24 uur handmatig te worden opgewonden.
Draai de kroon met de klok mee om het uurwerk op te winden.
Het instellen van de tijd
Trek de kroon (1) uit naar positie 1. Draai de kroon (1) met de klok mee totdat de uur (A) en
minuut (B) wijzers de juiste tijd weergeven. Druk de kroon (1) terug naar positie 0.
Het gebruik van de chronograaf
Start de chronograaf door op knop (2) te drukken. Door nogmaals op knop (2) te drukken
stopt de chronograaf weer. Bij het stoppen zullen de wijzers (M) en (L) de juiste waarde
weergeven. Om de chrono terug te laten keren naar zijn uitgangspositie, altijd eerst de chorno
stoppen door op knop (2) te drukken. Daarna pas drukken op knop (3) om de chrono terug te
laten keren naar de uitgangspositie.
PAS OP: Indien knop (3) wordt ingdrukt terwijl de chonograaf loopt, raakt het uurwerk
beschadigd.
0853
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Davis 0853 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Davis 0853 in the language / languages: English, German, Dutch, French as an attachment in your email.
The manual is 0,12 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
