233072

Datel ps3 wireless gaming headset Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
• Plug the USB charging cable (supplied) into any USB port on your PS3 and the other end into the USB
Charging Jack on the headset (you will need to remove the rubber cover first).
• Whilst charging, the Indicator Light will turn red.
• When charging is complete the Indicator Light will go off or flash red to alert you that the unit is fully
charged and ready to use.
Important charging advice:
• Before using the headset for the first time, be sure to charge it for at least 4 hours. Ideally, charge it
overnight (8-10hrs).
• For safety reasons, and to prevent damage to the headset, do not use the headset whilst it is
charging.
• Only use the original USB charger cable that came with the headset to charge it.
• Please recharge the Wireless Gaming Headset at normal room temperature.
When to recharge:
If the red light flashes during usage or when on standby, the battery is low and you should recharge the
headset as soon as possible. To avoid this happening, regularly recharge the headset between gaming
sessions.
Turning the Headset On/Off
To turn the headset on, press and hold the Function Button for 5 seconds. The Indicator Light will flash blue
3 times to confirm that the headset is now on. Whilst the headset remains on, the Indicator Light will flash
once every 10 seconds.
IMPORTANT: When using the headset with your PS3 console, press the Function Button once after switching
the headset on to activate it. Until you do this, some games or applications will not use the headset, even
though it is turned on.
To turn the headset off, press and hold the Function Button again for 5 seconds until the Indicator Light
flashes red 3 times.
Registering the Headset with your PS3
The first time you use the headset with your PS3 you will need to register it with the console and then select
it as an Audio Device. Follow these steps:
Registering the Bluetooth® Device
1. Ensure the headset is charged.
2. On your PS3’s browser menu go to ‘Settings’ then ‘Accessory Settings’ and finally ‘Register Bluetooth
Device’.
3. Select ‘Register Headset/Microphone/Headphones’. If prompted you will need to choose ‘Yes’ to
register a new Bluetooth device.
4. To put your headset in registration mode start with it switched off (see previous section). Next turn
it on by pressing and holding the Function Button for around 8 seconds until the Indicator Light
flashes continuously, alternating between blue and red.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Datel ps3 wireless gaming headset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Datel ps3 wireless gaming headset in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info