The Multi-Battery Charger, with its 4 slots, allows you to
charge simultaneously 4 Lynx battery packs. Both standard
capacity battery (94ACC0064) and high capacity battery
(94ACC0065) can be recharged with this accessory.
Figure 1
POWER SUPPLY
Plug the power supply, already in the box, into the connector,
then plug the power supply into a socket. Use a country
specific power cord.
Figure 2
LED INDICATORS
Battery Charging Status LED Description
LED Status
Power Green It is constant when the
battery charger is powered
Charger off Empty slot
Red Charging
Green Charge completed
Red blinking Error
822001300
USING THE MULTI-BATTERY CHARGER
Charge Function
Correctly insert the battery pack into the slot: simply press it
into the slot until the battery latch is automatically closed;
charging starts automatically.
Figure 3
To remove the battery, release the latch on the battery pack as
showed in figure 4:
Figure 4
TECHNICAL FEATURES
ELECTRICAL
Power supply* 12V DC
Max consumption 5 A
CHARGING TIME
Std Battery 2h 30
High Cap Battery 4h
PHYSICAL
Dimensions (LxWxH) 210 x 149 x 48 mm
(8.3 x 5.9 x 1.9 in)
Weight (without batteries) 418 g (14.7 oz)
LEDs 4 Charger Status LEDs
1 Power on LED
ENVIRONMENTAL
Working temperature** 0° to +50 °C (+32° to +122 °F)
Storage temperature -20° to +70 °C (-4° to +158 °F)
Humidity 95% without condensation
Electrostatic discharge
EN 61000-4-2
4 KV contact / 8 KV air
* Use only DL approved power adapters
** When inserted in the spare slot, batteries must be charged at a
temperature ranging from 0° to 44 °C.
At higher values the charging may slow down.
Never charge the main device or spare batteries in a closed space
where excessive heat can build up.
FCC COMPLIANCE
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Modifications or changes to this equipment without the
expressed written approval of Datalogic could void the
authority to use the equipment.
This device complies with PART 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
which may cause undesired operation.
Battery Charging
State LEDs
Power on LED
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Datalogic LYNX MULTI-BATTERY CHARGER at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Datalogic LYNX MULTI-BATTERY CHARGER in the language / languages: English as an attachment in your email.
The manual is 0,06 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
