By pulling out the crown just one step, the date can be set.
Aligning the chronograph:
After a battery-change for instance it’s possible that the seconds-counter isn’t on the
“0” position. This can be helped by:
Press both buttons A and B for a few seconds. The seconds counter should
move about 5 seconds.
Now use button A to adjust the seconds counter to it’s 12 O ‘clock position.
The same can be done for the minutes counter by pressing B.
If all the counters on the correct spot, press A and B simultaneously again.
Explanation of dials and counters:
Left-hand side : the minute-counter
Right-hand side : seconds hand
Bottom : the day indicator
The central hand is the seconds counter
Cal. ISA 8162
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Danish Design Q640 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Danish Design Q640 in the language / languages: English as an attachment in your email.
The manual is 0,03 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
