Manual Danfoss TPOne-RF (page 25 of 28) (English)

654612

25

Zoom out

Zoom in

Previous page

1/28

Next page

Danfoss Heating

25

Warnings

TPOne monitors several conditions and will provide warnings when

necessary, these messages will be shown at the top of the display.

If the condition that has created the warning has been corrected

then the message can be cancelled by selecting Clear Warnings

in the TPOne menu. Where more than one warning has occurred

the most recent will be shown on the display. All warnings can be

viewed and cleared in the Clear Warnings menu.

RF Lost If the RF connection between the TPOne-RF and

Receiver has been lost this warning will be shown.

If this warning is shown and the RF Icon is still

displayed on the TPOne-RF the loss of connection

may have only been temporary and re-connection

was made automatically. The warning can then be

cleared in the menu. If the RF Icon is not displayed

then connection may not be possible or may be

inconsistant.

Important Note: Ensure that there are no large metal

objects, such as boiler cases, other large appliances

or mirrors in line of sight between the transmitter and

receiver as these will prevent communication between

the TPOne-RF and receiver.

Pairing

Failed

When rst installed the startup Wizard will include

the pairing of the TPOne-RF and the Receiver. If

this function was not completed correctly or failed

due to unreliable connection then this warning

will be shown. Manual pairing can be made by

selecting this option in the installer menu.

Important Note: Ensure that there are no large metal

objects, such as boiler cases, other large appliances

or mirrors in line of sight between the transmitter and

receiver as these will prevent communication between

the TPOne-RF and receiver.

Frost Risk This will be displayed if the TPOne monitors a

temperature of below 5

o

C. TPOne will call for

heat if this occurs but if the heat source is faulty

then risk of frost damage may still occur. The

heating system should be checked to conrm it is

operating correctly

Low Heat If set mode temperature is not reached within

2 hours then TPOne will warn of Low Heat. The

heating system should be checked to conrm it is

operating correctly

1

Where is the battery in the TPOne-RF? How do you change it?. Why are there no simple instructions to users in your over-complicated manual Submitted on 2-11-2022 at 11:03
Reply Report abuse
I Have a TP One RF. I have scheduled 2 heating periods, it says it has saved my settings but the heating does not come on at the times I have set. I chose weekdays. I can control the heating manually with no problems. Just won't come on at scheduled times. Submitted on 28-10-2020 at 22:28
Reply Report abuse
Battery Low is displayed on my Danfoss TPOne-RF Thermostat. How do I change the battery and what battery is needed? Thanks Submitted on 4-9-2020 at 14:05
Reply Report abuse
My wired in thermostat is only showing the battery icon and no others will appear.My receiver will only show the ch light when I press both buttons. Why? What should I do? Submitted on 15-3-2020 at 10:22
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Danfoss TPOne-RF at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss TPOne-RF in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info