769352
6
Zoom out
Zoom in
Previous page
1/6
Next page
6 | © Danfoss | FHH | 2016.08 VUMBA102
Danfoss A/S
Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: +45 7488 8500 • Fax: +45 7488 8501
heating@danfoss.com • www.floorheating.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: +45 7488 8500 • Fax: +45 7488 8501
heating@danfoss.com • www.floorheating.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
0 2 4 6 8 10 12 14 16 18 20 22 24
Mon-Fri
Sa-Sun
Example: Residents Away from 8 to 16, with Asleep temperature set-back in the night.
0 2 4 6 8 10 12 14 16 18 20 22 24
Mon-Fri
Sa-Sun
Example: Residents Away from 9 to 17, with Asleep temperature set-back in the night.
0 2 4 6 8 10 12 14 16 18 20 22 24
Mon-Thu
Fri
Sa-Sun
Example: Program for weekend cottages. Residents Away Monday to Friday afternoon and At Home
during the week-end.
0 2 4 6 8 10 12 14 16 18 20 22 24
Mon-Fri
Sa-Sun
Example: Program for shops and offices.
Overriding a program
You can temporarily override a program by touching an icon on the Home Screen. The new tempera-
ture will be active until next scheduled program change.
Example: You come home during an Away period and touch the At Home icon to raise the room tempera-
ture to the At Home level.
Alarm If a connected floor sensor becomes defective, an alarm is indicated by flashing on the display for 1
second every 20 seconds.
Touch the screen and the display toggles between and .
Confirm with .
Normal operation (setting of temperature, etc.) is now possible with the room sensor only. The alarm is
still on, indicated by flashing.
Contact your installer and let him cancel the alarm by:
1. Re-connecting the floor sensor. If the flashing disappears the error is corrected.
2. Exchange the floor sensor. If the flashing disappears the error is corrected.
3. Disconnect the floor sensor and reset Danfoss Icon™ Programmable to default factory settings.
The alarm is now off, but the thermostat works without floor sensor.
Program overview
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Danfoss Icon - 230 V Programmable Room Thermostat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss Icon - 230 V Programmable Room Thermostat in the language / languages: English as an attachment in your email.

The manual is 4.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info