654609

Danfoss 842 Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
1
DESCRIPTION
Model 841 is a single channel unit.
Model 842 us a two channel unit. The two channels operate totally
independently of each other and can have different programmes set.
Both the models have a number of common features as described
below:
The Day and Time are displayed as fi ve digits on the liquid crystal display
(LCD)
The fi rst digit in its separate window marked Day will be numerical from
1 to 7 which may be allocated in sequence to the days of the week at the
user’s discretion. The normal convention is Monday = 1, Tuesday = 2 .........
Sunday = 7.
The remaining four digits in the window marked Time will display the time
to a resolution of one minute from 0000 to 2359.
A short ‘bleep’ will be heard if a keypad is pressed. In addition when a
numeric keypad is pressed the associated digit on the LCD will either
blink or change.
The 3 position selector switch (one for each channel on Model 842) may
be set to Off to override the programmes or may be set to Auto to follow
the programme which has been set, the third position marked Manual is
a continuous ON but only as long as the switch is held down.
The output status indicator light will be illuminated when the selector
switch is at Auto and a programme event occurs, or when the selector
switch is held in the Manual position.
The unit can be set at time of installation to provide either an On duration
from 1 to 15 seconds in half second pulses, or a continuous pulse from 1 to
15 seconds. (In the case of Model 842 each channel can be set to different
pulse types but of the same duration).
It is recommended that the key be removed from the keyswitch to prevent
unauthorised or accidental changes to the settings. The key can only be
removed when in Run position.
Seven Day Pulsed Electronic Timeswitch
Model 841 - Single Channel
Model 842 - Two Channel
User Instructions
TIME OF DAY
The mains electricity supply must be ON, the key inserted and turned to Set
Time position before carrying out the operations detailed below.
When the timeswitch is fi rst connected, or when the battery has been
allowed to discharge fully, and the mains electricity supply is switched ON
a dash (-) will be displayed in each of the fi ve digit positions.
Decide which day of the week you wish to assign as Day 1.
Press the number key representing the current day of the week (listen for
the ‘bleep’).
Key in the time using four keypads e.g. 8:30 a.m. must be keyed as
0 8 3 0
and 6:15 p.m. as
1 8 1 5
The unit will not allow the entry of a spurious day or time e.g. day 8 will not
be accepted nor will a time entry of 3600. Depression of an out of range
key will not register on the display; the LCD digit will blink but remain
unchanged until an acceptable number is keyed.
DO NOT PRESS ANY FUNCTION KEYPADS.
Returning the key to the Run position will enter the time shown on the
display.
78
9
45
6
12
3
Verify
0
Cancel
Enter
09i53
841
Auto Off Manual
Output
Set Pro-
gramme
Set Time
Run
Day Time
Day of Week Display
Time
10
Numeric
Keypads
3 Function
Keypads
3 Position
Keyswitch
Output Status
Indicator Light
3 Position
Selector
Switch
78
9
45
6
12
3
Verify
0
Cancel
Enter
09283
Auto Off Manual
Output
Set Ch.2
Set Ch.1
Run
Day Time
Day of Week Display
Time
10
Numeric
Keypads
3 Function
Keypads
4 Position
Keyswitch
Output Status
Indicator Light
3 Position
Selector
Switch
Auto Off Manual
Output
Set Time
CAUTION:
The unit operates at mains voltage and should only be opened by a
qualifi ed engineer after disconnection from the mains supply.
842
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Danfoss 842 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Danfoss 842 in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Danfoss 842

Danfoss 842 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info