562742
6
Zoom out
Zoom in
Previous page
1/26
Next page
8
1.0 INTRODUCTION
Congratulations with your new DALI ZENSOR loudspeaker. It is important to us that your new
DALI loudspeakers are set up and connected optimally. For this reason, we recommend that you
read this manual and follow its recommendations. The manual contains instructions for setup
and connection, as well as tips and advice on how to get the most out of your new loudspeakers.
DALI is acclaimed around the world for unique loudspeakers built to our uncompromising
standards for design and performance. The goal for every single DALI loudspeaker is always
our foremost commitment: To create a listening experience in your home that will make you
forget time and place.
Remember to sign up for the DALI newsletter at www.dali-speakers.com.
Enjoy!
2.0 UNPACKING
Be careful not to damage the contents when you unpack the parts. Depending on which DALI
ZENSOR model you have bought, different accessories come with the loudspeaker. Check that
all parts are contained in the cardboard box (see Table 1). Keep the packaging materials should
your speaker need to be relocated or serviced.
3.0 POSITIONING
To achieve the best results, the loudspeaker setup should be symmetrical round your favorite
listening position, see Figure 1A - C. We recommend that you experiment with the position of
your loudspeakers – the sound quality will change depending on the loudspeaker position. For
ZENSOR 1, ZENSOR 3 and VOKAL, the speakers should ideally be positioned, so that the height
of the tweeter is approximately at ear height when seated in your favorite listening position.
ZENSOR 5 and 7 are designed as floor standing speakers. They should be positioned minimum
10 – 20 cm (4 – 8”) from the rear wall. ZENSOR 1, ZENSOR 3 and VOKAL are designed to be
positioned flat up against the wall.
Objects positioned between the speaker and the listening position might negatively affect sound
quality. The speakers are designed to meet our wide dispersion principle, so they should NOT be
angled towards the listening position, but be positioned parallel with the rear wall, see Figure 2.
By parallel positioning, the distortion in the main listening area will be lowered and the room
integration will be improved. The wide dispersion principle will ensure that sound is spread
evenly within a large area in the listening room.
3.1 DALI ZENSOR 1
The speaker can be positioned on a stand/shelf or hung on a wall using the integrated wall
bracket. If positioned on a stand or shelf, the enclosed rubber bumpers can be mounted under
the speaker for stable and vibration free positioning, see Figure 3A. If hung on a wall, mount the
bumpers on the rear edges of the speakers, see Figure 3B. The speakers are hung on a wall
using one screw mounted in the wall. The screw must fit the wall bracket on the rear side of
the speaker, see Figure 3C.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dali ZENSOR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dali ZENSOR in the language / languages: English, German, Danish as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info