562737
4
Zoom out
Zoom in
Previous page
1/29
Next page
6
7
ENGLISH
ENGLISH
The loudspeakers come with a set of DALI CONNECT cables for use if you don’t use bi- amping/
wiring (does not apply to HELICON S600). The short CONNECT cables have spade lugs at both
ends which should be connected as shown in the diagram below. Connect the two red terminals
to each other and the two black terminals to each other.
DALI CONNECT CABLES
Generally, we recommend experimenting with the position of the speakers in your listening room
to get the best performance. Therefore, it is advisable to wait until you have found the final posi
-
tion for the loudspeakers before mounting the spikes.
On hard surfaces, we recommend
using the spikes without coasters
On soft surfaces (like a carpet) we recom-
mend using the spikes without coasters.
Please note that there is a risk of damaging
the surface underneath the carpet.
On soft surfaces (like a wood floor)
we recommend using the spikes
with coasters to avoid damage of
the surface.
DALI CONNECT on HELICON MK2
speakers.
DALI CONNECT on HELICON
speakers.
All HELICON/HELICON MK2 models can be bi-wired
(one set of cables for the bass and one set for the
midrange/tweeters) or bi-amped (one amplifier for
the bass and one for the midrange/tweeters). Please
use the DALI CONNECT cables (or similar) to connect
the low and high frequency sections, if you are not
bi-wiring/bi-amping the speakers (as described in the
previous section). Instead of DALI CONNECT cables,
you may also use a piece of loudspeaker cable.
BI-WIRING/BI-AMPING
Normal wiring
The high quality terminals on the HELICON/HELICON
MK2 loudspeakers accept the following types of
termination:
4 mm banana plugs
Loudspeaker cables with spade lugs
Bare wire ends
When using any of the options, make sure that
the screw terminals are firmly tightened for best
connection. Make certain that the cable ends are
firmly pushed into the terminals and that there are
no loose wires, which could cause a short circuit and
damage the amplifier.
Before connecting or disconnecting any cables, always turn off the amplifier to avoid electrical
shock or damage to your equipment.
For installation of the HELICON S600/S600MK2 subwoofers, skip the next two paragraphs – go
to the “Connection of HELICON S600/S600MK2” section.
CONNECTION
SCREW TERMINALS
Right
loudspeaker
Left
loudspeaker
Amplier
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dali HELICON at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dali HELICON in the language / languages: German, Danish as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dali HELICON

Dali HELICON User Manual - English - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info