745208
4
Zoom out
Zoom in
Previous page
1/10
Next page
CONNECTIONS
Always switch off your amplifier/receiver before changing any connections. Always
use cables of the same type and of the same length for the left and right loudspeakers.
Always connect loudspeakers in the right side of the listening room to the output
terminals marked (R) or (Right) on the amplifier and loudspeakers in the left side of
the listening room to the output terminals marked (L) or (Left) on the amplifier.
Tighten all connections so that cables do not get loose (do not use tools). No loose
strands of wires should stick out, as this may cause a short circuit and damage the
amplifier. Re-tighten the connections now and then as the connections may get loose
after a period of time.
Cable quality and construction does make a difference. Your should therefore always
buy cable of good quality to ensure the best possible sound quality.
Fig. 1
4
Loudspeaker cables must always be
connected in phase between amplifier and
loudspeaker, that is from red plus (+) terminal
to red plus (+) terminal and from black minus
(-) terminal to black minus (-) terminal.
If not all loudspeakers are connected in phase
to the stereo or surround system, you will
experience weak bass and diffuse perspective.
Whether you are to connect two stereo
loudspeakers or a whole surround system you
must follow the same guidelines. In the dia-
gram (fig. 1) it is shown how to connect a 5
channel surround system by using single-
wiring (bi-wiring and bi-amping can be carried
out according to the directions below).
A stereo amplifier has two pairs of output
terminals called Right (R) and Left (L). You
connect the right (R) and left (L) loudspeakers
here. A surround amplifier also has outputs for
stereo loudspeakers typically called Front.
Furthermore, the surround amplifier has
outputs for Center and rear loudspeakers
Rear or Surround (fig. 1). Please check with
the manual for your surround amplifier.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dali Blue series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dali Blue series in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info