642464
16
Zoom out
Zoom in
Previous page
1/20
Next page
10 English
Indoor Unit Installation
5-5. Prepare the accessory (optional parts) [Figure 2].
1) Remove the cover from the accessory (optional parts).
2) Insert the connection cord into connector “S21” (white) in the accessory (optional parts).
3) Route each of the connection cords through the cut-outs in the accessory, then reinstall the accessory cover in its
original position.
4) Insert the accessory (optional parts) connector into connector “S403” in the electrical component box. Then route the
connection cord through the cut-out in the electrical component box.
5-6. Install the cover of the electrical component box in its original position [Figure 3].
5-7. Install the accessory (optional parts) [Figure 3].
1) Install the accessory (optional parts) into the electrical component box.
2) Route the connection cord as shown in [Figure 3].
5-8. Install the electrical component box in its original position.
1) Install the electrical component box (1 screw).
2) Install the thermistor in its original position on the heat exchanger.
3) Connect the earth wire.
4) Install the connector (S200) in its original position.
5) Connect the inter-unit wire in its original position.
6) Install the flap.
5-9. Install the front grille in its original position (2 screws).
5-10. Install the service lid (1 screw).
Disengage the tab.
Remove the accessory cover.
Route each of the
connection cords.
Insert “S403”.
Route the connection
cords through the cut-outs.
“S21”
Accessory
Accessory
Accessory cover
Accessory
cover
Install the accessory.
Install the accessory cover
in its original position.
Cut-out for the “S403”
connection
Cut-out for the
connection cord
Figure 2: Preparing the accessory
Figure 3: Installing the accessory
Cut-outs for the connection cords
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daikin FTXS25K2V1B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daikin FTXS25K2V1B in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Daikin FTXS25K2V1B

Daikin FTXS25K2V1B User Manual - English - 44 pages

Daikin FTXS25K2V1B User Manual - German - 44 pages

Daikin FTXS25K2V1B Installation Guide - German - 24 pages

Daikin FTXS25K2V1B Installation Guide - Dutch - 20 pages

Daikin FTXS25K2V1B User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info