486478
22
Zoom out
Zoom in
Previous page
1/24
Next page
22
TROUBLE SHOOTING
Most problems are easily solved if you understand the cause.
Check the following list for problem before calling for service.
If the error mode such as IE, OE, UE were displayed on the control part, in order to solve these
problem, first turn off the power of the washing machine and then turn on the power pressing
Power button.
If PFE error mode was displayed on the control part, in order to solve this problem, first turn off the
power of the washing machine, second turn on the power pressing Power button, third press SPIN
button and last press Start/Pause button.
The washer will not
operate at all.
Water is not supplied
Error display
The washer will not drain
Error display
The washer will not spin
Vibrating and too noisy
Error display
The washer will stop
during spinning .
Spinning is insufficient.
Error display
These cases are not malfunctions;
The sound wing heard during water supply is the operating sound made by the water inlet valve.
Is there a power failure?
Is the power cord correctly connected to an electric outlet?
Did you turn on the power?
Did you press Start/Pause button?
Is there correct amount of laundry in the washer?
Did you connect the inlet hose and open the water tap?
Is the inlet hose or the water tap frozen?
Is the water supply shot off?
Is there any foreign matter blocking up the inlet hose filter?
Is the drain hose frozen or blocked up by dirt?
Is the drain hose kinked or deformed?
Is the end of the drain hose immersed in water?
Is there excessive dirt inside the drain filter?
Is the clothes in the drum collected on one side?
Is the washer installed on an uneven floor or is the vibration
serious?
Is the door open? (The lamp “” will light up in this case.)
Is the filter of the drain pump clogged?
Is the drain pump operated?
Did you use the proper amount of detergent?
Is the drain hose placed higher than 1m above floor?
Is the washer installed on an uneven floor?
Have all the transit bolts removed?
PROBLEM CHECK POINT
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo DWD-FU1041 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo DWD-FU1041 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info