146322

Daewoo dtl-2950 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
12
Channel skipping
- You can select skip „YES” or „NO” using the re-
mote control RED „Skip” button (A11). A pro-
gram with skip „YES” doesn’t appear on screen
when changing channels with the PROGRAM
UP (A6) / DOWN (A21) buttons.
Manual Channel Tuning
Choose a starting point.
- Select with „Program” the program from which
you want to start manual tuning. Then the chan-
nel number, the frequency, the name and the
program number of this program are displayed
in the Install menu.
TV system modification
If necessary, you can modify the TV system :
- Select „system” function.
- Adjust choosing between FRANCE (L/L’), GB (I),
EURO (B/G), E/ EURO (D/K) systems.
Then, the program displayed on the screen is
changed to the chosen system.
Channel deleting
- Select the program to delete using the re-
mote control CURSOR UP (A6) / DOWN (A21)
buttons.
- Press the remote control YELLOW „Delete” but-
ton (A26). The deleted program is moved to
program number 99 with skip changed to „YES”.
The existing 99 program is moved to program
number 98 and so on.
Channel searching
- Select the „Frequency” function.
- Press, and hold for more than 1second, the re-
mote control CURSOR RIGHT (A20) [LEFT (A7)]
buttons to start up [down] manual tuning.
- Searching will stop automatically at the next
channel found (to stop tuning, press the re-
mote control MENU button (A19)).
Note: You can directly locate a program by
entering the data into the „channel” or
the „frequency” function.
Perform fine tuning
- If you are unable to get a good picture or rea-
sonable quality sound due to poor reception,
it is possible to perform fine tuning.
- Select the „frequency” function.
- Press, for less than 1 second, the remote con-
trol CURSOR RIGHT(A20) [LEFT(A7)] buttons
to perform up [down] fine tuning in steps of
0.05MHz (50 kHz).
Channel order changing
- Select the program to move using the remote
control CURSOR UP (A6) / DOWN (A21) but-
tons.
- Press the remote control GREEN „Move” button
(A12): the program line background is high-
lighted in green, and can be moved to another
position using the remote control CURSOR UP
(A6)/ DOWN (A21) buttons.
- When the desired position is reached, confirm
the new position pressing the remote control
GREEN „Confirm” button (A12). Then the program
line background will return again to grey.
Enter station name
It is possible to enter your own choice of name
for each program. You can change an existing
name, or enter a name where none exists. If none
exists „- - - - - - -” will be shown in the Install menu,
and program status display ( see the section
PROGRAM STATUS DISPLAY on page 8).
- Select the „NAME” function.
- Select one of the 7 character positions by us-
ing the remote control CURSOR RIGHT (A20) /
LEFT (A7) buttons to move the cursor.
- Then use the CURSOR UP (A6) /DOWN (A21)
buttons to select the desired character for
that position.
- Repeat the last two instructions for other po-
sitions, as desired.
- Once the name has been entered, press the
OK button (A18) to store it. The name will be
memorised to the program number currently
shown on the „Store To” line. The „Store To” pro-
gram number will highlight in red briefly.
Store program in memory
- Select the „store to” function
- Enter the program number you want to store
to either by using the remote control CUR-
SOR RIGHT (A20) / LEFT (A7) buttons, or di-
rectly by using the remote control NUMBER
0...9 buttons (A3).
- Press the OK button (A18) to confirm.
Remarks: this function can also be used if you
want to copy a program already memo-
rised to another program number.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Daewoo dtl-2950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Daewoo dtl-2950 in the language / languages: English as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info