Manual Cuisinart FP-13D series (page 14 of 17) (English)

650788

Zoom out

Zoom in

1/17

CLEANING, STORAGE AND

MAINTENANCE

• Keep your Cuisinart

Elemental

13-Cup Food

Processor ready to use on the kitchen counter.

When not in use, leave it unplugged.

• Keep the blades and discs out of reach

of children.

• All parts except the housing base are

dishwasher safe, and we recommend washing

them in the dishwasher on the top rack only.

Due to intense water heat, washing the work

bowl, cover and accessories on the bottom

rack may cause damage over time. Insert the

cover with the

feed tube facing up to ensure proper cleaning.

Insert the work bowl and pusher upside down for

drainage. Remember to unload the dishwasher

carefully wherever you have placed sharp

blades and discs.

• To simplify cleaning, rinse the work bowl,

cover, pusher and blade or disc immediately

after use so food won’t dry on them. Be sure

to position the pusher upside down for

drainage. If food lodges in the pusher, remove

it by running water through it, or use a bottle

brush.

• If you wash the blades and discs by hand, do

it carefully. When handling, use the plastic

hubs. Avoid leaving them in soapy water

where they may disappear from sight. To clean

the blades, fill the work bowl with soapy water,

hold the blade by its plastic center and move

it rapidly

up and down on the center shaft of the bowl.

Use of a spray attachment is also effective.

If necessary, use a brush.

• The work bowl is made of SAN plastic with

metal components. It should not be placed in

a microwave oven.

• The housing base may be wiped clean with

a soapy, nonabrasive material. Be sure to dry

it thoroughly.

• If the feet leave spots on the counter,

spray them with a spot remover and wipe

with a damp sponge.

• If any trace of the spot remains, repeat the

procedure and wipe the area with a damp sponge

and nonabrasive cleaning powder.

IMPORTANT: Never store any blade or disc on

the motor shaft. No blade or disc should be

placed on the shaft except when the processor

is about to be used.

MAINTENANCE: Any other servicing should be

performed by an authorized service

representative.

FOR YOUR SAFETY

• Like all powerful electrical appliances,

a food processor should be handled with care.

Follow these guidelines to protect yourself and

your family from misuse that could cause

injury.

• Handle and store blades and discs carefully.

Their cutting edges are very sharp.

• Never put blades or discs on the motor shaft

until the work bowl is locked in place.

• Always be sure that the blade or disc is down

on the motor shaft as far as it will go.

• Always insert the blade in the work bowl

before putting ingredients in bowl.

• When slicing, shredding or dicing food, always

use the pusher. Never put your fingers or

spatula

into feed tube.

• Always wait for the blade or disc to stop spinning

before you remove the pusher assembly or

cover from the work bowl.

• Always unplug the unit before removing food,

cleaning or putting on or taking off parts.

• Always remove work bowl from base of

machine before you remove the blade.

• Be careful to prevent the chopping/mixing

blade from falling out of the work bowl when

emptying the bowl. Remove it before tilting the

work bowl.

TECHNICAL DATA

The motor in your food processor operates on a

standard line operating current. The appropriate

voltage and frequency for your machine are

shown on a label on the bottom of the base.

An automatic, temperature-controlled circuit

breaker in the motor ensures complete

protection against motor burnout. If the

processor runs for an exceptionally long time

when chopping, mixing or kneading a thick or

heavy mixture in successive batches, the motor

may overheat. If this happens, the processor will

stop. Turn it off and wait for the motor to cool

before proceeding. It will usually cool within 10

minutes. In extreme cases, it could take an hour.

Safety switches prevent the machine from

operating when the work bowl or the cover is not

locked into position. The motor stops within

seconds when the motor is turned off; and when

the pusher assembly is removed, a fast-stop circuit

also enables the motor to stop within seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cuisinart FP-13D series in the language / languages: English as an attachment in your email.

The manual is 10,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cuisinart FP-13D series

Cuisinart FP-13D series Manual - English - 51 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info