498277
12
Zoom out
Zoom in
Previous page
1/14
Next page
12
cloth and dry before storing. Wipe heating plate
with a clean, damp cloth. Never use rough,
abrasive materials or cleansers to clean the
resting plate. Do not dry the inside of the water
reservoir with a cloth, as lint may remain.
DECALCIFICATION
Decalcification refers to removing the calcium
deposits which form over time on the metal
parts of the coffeemaker.
For best performance from your coffeemaker,
decalcify the base unit from time to time. The
frequency depends upon the hardness of your
tap water and how often you use the
coffeemaker.
To clean, fill the water reservoir to capacity
with a mixture of
1
³
of white vinegar and
²⁄
³
water. Press the Grind Off button, and turn
the coffeemaker on by pressing the On button.
One cycle should be sufficient to adequately
clean the coffeemaker. When the cycle is
completed and the five beeps sound, turn
coffeemaker off. Repeat operation, this time
using fresh cold water.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Continuous
beeping
Hopper not locked in place
(when brewing with whole
beans)
Check to see if the hopper container release knob is in the unlocked
position
• Place the hopper container on the unit
Turn the knob to the locked position
• Press On/Off or Program again to resume
Filter door not closed Check to be sure that all components of the filter compartment are in place
Close filter door (you will hear a click if the door is properly shut)
• Press On/Off or Program again to resume
Filter basket not in place Open filter door by pressing the filter door release button
• Hook filter basket with cover onto door
Close filter door (you will hear a click if the door is properly shut)
• Press On/Off or Program again to resume
Filter basket cover not in
place
Open filter door by pressing the filter door release button
Put on cover, matching “grind” arrows
• Hook filter basket with cover onto door
Close filter door (you will hear a click if the door is properly shut)
• Press On/Off or Program again to resume
Filter Basket not emptied of
used grinds
Open filter door by pressing the filter door release button
• Remove filter basket with cover
Discard used grounds
• Replace filter basket with cover and close door
• Press On/Off or Program again to resume
Coffee is
weaker than
usual
Coffee chute is clogged • Remove the hopper from the unit
• Lift coffee channel cover
• Clean out coffee chute
• Replace channel cover and hopper
Your coffeemaker is now ready to brew again
Not enough beans in hopper Be sure there are enough beans in your hopper for the amount of coffee you
intend to brew
Strength setting is incorrect Check your strength setting — displayed on the LCD screen
To change your strength settings press the strength control button
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cuisinart DGB 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cuisinart DGB 900 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info