657575
1
Zoom out
Zoom in
Previous page
1/3
Next page
Montage-/Bedienungsanleitung für CUBE Natural Fit Griffe und Bar Ends
Bitte unbedingt beachten! Nur eine einwandfreie Montage gewährleistet die optimale Funktion der Natural Fit Griffe und der Natural Fit Bar Ends.
Mounting/Installation Instructions for CUBE Natural Fit Grips and Bar Ends
Please note! Optimal functioning of the Natural Fit grips and the Natural Fit bar ends is only ensured with proper installation.
Notice de montage/utilisation des poignées et bar ends Natural Fit CUBE
À respecter impérativement! Seul un montage irréprochable permet de garantir la fonction optimale des poignées et bar ends Natural Fit.
Description of signs / symbols in these instructions:
Pay special attention to the following symbols during the installation.
Caution: This symbol refers to an important installation step. Non-obser-
vance of these instructions can endanger your life and your health.
Information: This symbol marks additional information, e.g. on the hand-
ling of the product.
The above-described possible consequences will not be repeated in the
instructions every time one of the symbols appears.
Erklärung Zeichen / Symbole in dieser Anleitung:
Schenken Sie den folgenden Symbolen besondere Beachtung bei der
Montage.
Warnung: Dieses Symbol verweist auf einen wichtigen Montageschritt,
dessen Nichtbefolgen Ihr Leben / Ihre Gesundheit gefährden kann.
Information: Dieses Symbol kennzeichnet Zusatzinformationen, z.B. über
die Handhabung des Produkts.
Die oben geschilderten möglichen Konsequenzen werden in der Anleitung
nicht immer wieder geschildert, wenn diese Symbole auftauchen.
Explication des symboles / signes dans la présente notice :
Veuillez apporter une attention particulière aux symboles suivants pen-
dant le montage.
Avertissement: ce symbole renvoie vers une étape de montage import-
ante, dont le non-respect peut mettre en danger votre vie / votre santé.
Information: ce symbole repère des informations supplémentaires, par
ex. sur la manipulation du produit.
Les conséquences possibles décrites plus haut ne sont pas reprises à
chaque fois que ces symboles apparaissent dans cette notice.
RACE TOUR COMFORT
Pending System GmbH & CO KG
CUBE Bikes
Ludwig-Hüttner-Str. 5-7
D-95679 Waldershof
Lesen Sie diese Anleitung sorgfältig durch.
Bei Fehlmontage droht Sturzgefahr.
Es dürfen nur Lenker verwendet werden, die vom Hersteller für Innenklemmung und Bar Ends freigegeben sind, dem angegebenen Drehmoment von 5 Nm für die Griffinnenklemmung und von
7 Nm für die Bar Ends Außenklemmung standhalten und einen Außendurchmesser von 22,2 mm aufweisen.
Die Natural Fit Griffe benötigen einen ungekrümmten Montagebereich mit gleichbleibendem Außendurchmesser von 22,2 mm auf mindestens 150 mm Länge.
Bei der Montage von Natural Fit Bar Ends auf dünnwandigen Aluminiumlenkern muss ein vom Lenkerhersteller empfohlener Sicherheitsendstopfen verwendet werden.
Die Natural Fit Bar Ends dürfen nicht an Carbonlenker montiert werden.
Achten Sie darauf, dass der Montagebereich des Lenkers vor dem Anbringen der Natural Fit Griffe und der Natural Fit Bar Ends gründlich mit Alkohol o.ä. entfettet und gereinigt ist.
Das Drehmoment beträgt 5 Nm (bei den Natural Fit Griffen) und 7 Nm (bei den Natural Fit Bar Ends). Die Klemmschrauben dürfen nicht überdreht werden! Verwenden Sie hierfür geeignetes
Montagewerkzeug (Drehmomentschlüssel).
Die Natural Fit Griffe dürfen sich nach der Montage nicht mehr von Hand verdrehen lassen.
Ziehen Sie die Klemmschrauben nach 50 km bzw. nach der ersten Fahrt nach und prüfen Sie diese danach vor jeder Fahrt auf festen Sitz.
Nach Stürzen sind alle Bauteile auf Beschädigungen zu überprüfen und gegebenenfalls auszutauschen.
Nach der Montage / Testfahrt:
Verdrehen sich die Natural Fit Griffe trotz einer korrekten Montage, so ist Ihr Lenker nicht für die Natural Fit Griffe geeignet.
Überprüfen Sie nach der Montage der Natural Fit Griffe, ob die Bremsgriffe und die Schalthebel ohne Veränderung der Handhaltung erreichbar sind und ob Sie alle Funktionen Ihres Fahrrades
weiterhin ohne Einschränkung nutzen können.
Um die für Sie angenehmste Position der Natural Fit Griffe herauszufinden, verändern Sie den Positionswinkel in kleinen Schritten.
Bei Fragen wenden Sie sich an Ihren Fachhändler.
Read these instructions carefully.
Improper installation may result in an accident.
Only use handlebars approved by the manufacturer with regard to the inner clamping and the bar ends; these must withstand the indicated torque value of 5 Nm for the inner clamping of the grip
and 7 Nm for the bar ends and have an outer diameter of 22.2 mm.
The Natural Fit grips require a non-curved installation area with a consistent outer diameter of 22.2 mm over a length of 150 mm at least.
When installing Natural Fit bar ends on thin-walled aluminium handlebars a safety plug recommended by the handlebar manufacturer must be used.
Do not mount Natural Fit bar ends on carbon handlebars.
Make sure to thoroughly clean and degrease the installation area of the handlebar with alcohol or the like before installing the Natural Fit grips and the Natural Fit bar ends.
The torque value is 5 Nm (for the Natural Fit grips) and 7 Nm (for the Natural Fit bar ends). Do not overtighten the clamp screws! Use suitable installation tools (torque wrench).
Make sure that the Natural Fit Grips are tight after installation (you should not be able to turn them).
Retighten the clamp screws after 50 km or after your first ride and check the tight fit subsequently before every ride.
After a fall all components must be checked for damage and replaced, if necessary.
After the installation / test ride:
If the Natural Fit grips move in spite of a proper installation, your handlebar is not suitable for the Natural Fit grips.
After the installation of the Natural Fit grips: Check whether the brake levers and shifters are within easy reach and that you do not need to change the position of your hands. Make sure you can
use all functions of your bike without limitations.
Modify the position angle in small steps to find the most convenient position of the Natural Fit grips.
If you need advise, contact your bicycle dealer.
Veuillez lire attentivement la présente notice.
En cas de montage incorrect, vous risquez une chute.
Il faut impérativement utiliser des guidons validés par le fabricant pour la fixation interne et les bars ends, résistant au couple de serrage indiqué de 5 Nm pour la fixation interne de la poignée et
de 7 Nm pour la fixation externe des bar ends et présentant un diamètre extérieur de 22,2 mm.
Les poignées Natural Fit nécessitent une zone de montage droite avec un diamètre extérieur uniforme de 22,2 mm sur une longueur de 150 mm au minimum.
Lors du montage des bar ends Natural Fit sur des guidons en aluminium à paroi fine, il convient d‘utiliser le bouchon de sécurité recommandé par le fabricant du guidon.
Les bar ends Natural Fit ne doivent en aucun cas être montés sur des guidons en carbone.
Veillez à nettoyer et à dégraisser la zone de montage sur le guidon minutieusement avec de l‘alcool ou un nettoyant similaire avant la mise en place des poignées et bar ends Natural Fit.
Le couple de serrage s‘élève à 5 Nm (pour les poignées Natural Fit) et 7 Nm (pour les bar ends Natural Fit). Les vis de serrage ne doivent en aucun cas subir une rotation trop élevée ! Utilisez de
l‘outillage de montage adéquat dans ce cadre (clé dynamométrique).
Les poignées Natural Fit ne doivent plus pouvoir tourner à la main après le montage.
Resserrez les vis de serrage après 50 km ou la première sortie en vélo et vérifiez leur bonne fixation avant chaque départ ensuite.
En cas de chute, vérifiez tous les composants quant à l‘absence d‘endommagement et remplacez-les le cas échéant.
Après le montage / un parcours d‘essai :
Si les poignées Natural Fit continuent de tourner malgré un montage correct, cela signifie que votre guidon n‘est pas adapté au montage des poignées Natural Fit.
Après le montage des poignées Natural Fit, vérifiez si les poignées de frein et les manettes de vitesse sont accessibles sans modifier la position de la main et si vous réussissez à utiliser toutes les
fonctions de votre vélo sans limitation.
Pour trouver la position la plus agréable de vos poignées Natural Fit, modifiez l‘angle de positionnement par petits pas.
Adressez-vous à votre vendeur spécialisé pour toute question.
Druckfehler, Irrtümer und Änderungen vorbehalten.
Cube reserve the right to change any products without prior notice.
DE / EN / FR
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cube Grips at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cube Grips in the language / languages: English, German, French as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info