648530
3
Zoom out
Zoom in
Previous page
1/6
Next page
EN
EN • 5
STEP 1 DESULPHATION
Detects sulphated batteries. Pulsing current and voltage, removes sulphate from the lead
plates of the battery restoring the battery capacity.
STEP 2 SOFT START
Tests if the battery can accept charge. This step prevents that charging proceeds with a
defect battery.
STEP 3 BULK
Charging with maximum current until approximately 80% battery capacity.
STEP 4 ABSORPTION
Charging with declining current to maximize up to 100% battery capacity.
STEP 5 ANALYSE
Tests if the battery can hold charge. Batteries that can not hold charge may need to be replaced.
STEP 6 RECOND
Choose the Recond program to add the Recond step to the charging process. During the Recond step
voltage increases to create controlled gasing in the battery. Gasing mixes the battery acid and gives
back energy to the battery.
STEP 7 FLOAT
Maintaining the battery voltage at maximum level by providing a constant voltage charge.
STEP 8 PULSE
Maintaining the battery at 95–100% capacity. The charger monitors the battery voltage and gives a
pulse when necessary to keep the battery fully charged.
1
VOLTAGE (V)CURRENT (A)
ANALYSE RECOND PULSE
DESULPHATION SOFT START BULK ABSORPTION
28.8V
Increasing voltage
to 29.4V @ 25°C
4A
4A until 25.2V Increasing voltage
to 28.8V @ 25°C
4A
1
7
Limit:
Max 30h Max 8h 3 minutes
30 min or 4h
depending on
battery voltage
10 days
Charge cycle restarts
if voltage drops
Charge cycle restarts
if voltage drops
Max 4h
29.4V
28.8V 4A until 25.2V
4A until 25.2V
Increasing voltage
to 28.8V @ 25°C
4A
28.8V @ 25°C
Declining current
29.4V @ 25°C
Declining current
28.8V @ 25°C
Declining current
Checks if voltage
drops to 24V
Checks if voltage
drops to 24V
Checks if voltage
drops to 24V
27.2V
4A
27.2V
4A
27.2V
4A
25.8V‒28.8V
4–1.4A
25.8V‒29.4V
4–1.4A
25.8V‒28.8V
4–1.4A
Max 4h
2 3 4 5
FLOAT
6 8
RECOND
AGM
NORMAL
Max 31.4V
1.0A
CHARGING PROGRAM
20015561D MXT 4.0, Manual EU, Print file 003.indd 5 2011-10-11 12:42:47
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ctek MXT 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ctek MXT 4.0 in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ctek MXT 4.0

Ctek MXT 4.0 User Manual - German - 6 pages

Ctek MXT 4.0 User Manual - Dutch - 6 pages

Ctek MXT 4.0 User Manual - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info