785142
4
Zoom out
Zoom in
Previous page
1/6
Next page
38 • NL
LITHIUM
OPLAAD-PROGRAMMA'S
Instellen met de MODUS-knop. Na circa twee seconden activeert de lader het
geselecteerde programma. Het geselecteerde programma start vanzelf weer op,
wanneer de lader een volgende keer wordt aangesloten.
Deze tabel beschrijft de verschillende oplaadprogramma's:
Programma Uitleg Temp. bereik
LITHIUM
Lithium-programma
13,8 V, 15 A/25 A
Te gebruiken voor het laden van
lithium-accu's.
0 °C–+40 °C (32 ºF–104 ºF)
Lees de handleiding van de
accu voor opladen buiten dit
temperatuurbereik. STORINGSLAMPJE
Als het storingslampje brandt, controleert u het volgende:
RECONDNORMAL AGM
M25
MODE
LITHIUM
1. Is de rode klem van de acculader wel aangesloten op de
pluspool van de accu? Sluit de acculader aan volgens de
handleiding van het voertuig.
2. Is de acculader wel aangesloten op een 12 V-accu?
3. Controleer of de klemmen geen kortsluiting maken?
4. Is het opladen onderbroken tijdens of ?
Herstart de acculader door op de MODE-knop te drukken. Als het
opladen nog steeds niet lukt, is de accu mogelijk ...
... niet in staat om lading te accepteren of zijn mogelijk parallelle
ladingen met de accu verbonden. Koppel de parallelle ladingen af
en herstart de lader door op de MODUS-knop te drukken.
... de oplader maximaal 3 keer opnieuw op te starten. Als de
oplader daarna niet doorgaat met de Bulk-werking, is de accu
mogelijk aan vervanging toe.
... niet in staat om lading vast te houden en aan vervanging toe.
POWER LAMPJE
Als het Aan/uit-lampje brandt met:
RECONDNORMAL AGM
M25
MODE
LITHIUM
1. STABIEL LAMPJE
Het netsnoer is aangesloten op de wandcontactdoos.
2. KNIPPERT:
De acculader is in de energiespaarstand. Dit gebeurt als de acculader niet
binnen 2 minuten op de accu wordt aangesloten.
ACCU'S MET "ONTLADINGSBESCHERMING"
Sommige lithium-accu's hebben een ingebouwde UVP (under voltage protection,
ontladingsbescherming) die de accu uitschakelt om te voorkomen dat deze te diep
ontlaadt. Dat voorkomt dat de oplader registreert dat er een accu is aangesloten. Om
dat te omzeilen, moet de acculader de UVP openen. Er zijn twee opties om de accu te
"wekken" - automatisch en handmatig.
Tijdens de automatische "wek"-periode knippert de LED totdat het oplaadprogramma
wordt gestart en brandt de LED met een stabiel licht. Het automatisch "wekken" is
actief gedurende maximaal 5 minuten.
Als de oplader na 10 minuten in de stand-bymodus staat ( Aan/uit-LED knippert) is het
automatisch wekken niet gelukt. Probeer het handmatige wekken.
Druk gedurende circa 10 seconden op de Modus-knop om de UVP te omzeilen, om de
handmatige "wekfunctie" te gebruiken. Tijdens de "wek"-periode knippert de LED
totdat het oplaadprogramma wordt gestart en brandt de LED met een stabiel licht. Als
de handmatige wekfunctie niet is gelukt, begint de Aan/uit-LED na uiterlijk 10 minuten
te knipperen. Ontkoppel een parallelle lading van de accu en probeer het opnieuw. Als
het opladen daarna niet opstart, is de accu mogelijk aan vervanging toe.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ctek M25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ctek M25 in the language / languages: Dutch as an attachment in your email.

The manual is 0.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info