498264
26
Zoom out
Zoom in
Previous page
1/32
Next page
26
ESP
CONEXIONES DE ALIMENTACIÓN Y ENCENDIDO A DISTANCIA (FIG. 2)
(1) Terminal de conexión GND para la masa, al polo negativo de la batería
(2) Terminal de conexión REM para el encendido a distancia
(3) Terminal de conexión para un voltaje de batería de +12 V
(4) Batería
(5) Fusible (non incluido en el pack)
(6) Conexión del cable de la unidad o de la antena eléctrica
(7) Fusible amplificador
FIGURES (P. 28-30)
El LED (POWER, fig. 1, 1) encendido significa que el Amplificador funciona normalmente.
El LED (PROTECTION, fig. 1, 10) encendido significa que el Amplificador esta en cortocircuito o
sobrecalentado. Puede ser debido a una impedancia demasiado baja de los altavoces. Si esto ocurre
el circuito de protección del amplificador lo desconecta inmediatamente. El amplificador vuelve a
funcionar por si solo una vez solventado el problema.
CIRCUITO DE PROTECTÌON
CONEXIONES Y ELEMETOS DE MANDO (FIG. 1)
(1) LED de alimentación
(2) Entrada alta opcional para las salidas de altavoces de su unidad de Radio-CD.
(3) Señal de audio para amplificadores adicionales
(4) Salidas de audio
(5) Regulador de nivel de entrada
(6) Selector para HP (filtro passa-alto) / FULL / LP (filtro passa-bajo)
(7) Regulador de frecuencia de transición paso alto
(8) Regulador de frecuencia de transición paso bajo
(9) Regulador de nivel de bajos (bass boost)
(10) LED de protección
La entrada de alta es adecuada para conectar la entrada de amplificador con cable de altavoz si su
unidad radio-CD no esta dotada de salidas de previo. Amplíe los cables de salida de la unidad radio-
CD hasta la ubicaciòn del amplificador con cable de altavoz adecuado que puede proporcionarle su
instalador autorizado. Conecte cada cable con los conectores de salida de alta correspondientes, según
se indica mas abajo. Por favor, asegúrese que un cable de masa (cable negro GND) esté conectado
en cada conector de alta, que puede derivar del conector masa GND del amplicador.
Atencion: jamás utilice la entrada de alta y RCA (pre-amp) al mismo tiempo. Esto puede ocasionar
graves daños al amplificador. Tenga mucho cuidado en que los cables de alta jamás entren en contacto
con masa.
+
-
Gris = altavoz – derecho- positivo
-
+
Marrón = altavoz – derecho – negativo
Negro = conexion masa (GND)
Blanco = altavoz – izquierdo – negative
Verde = altavoz – izquierdo - positivo
HIGH LEVEL INPUT (ENTRADA DE ALTA)
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crunch GTi2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crunch GTi2100 in the language / languages: English, German as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info