498264
20
Zoom out
Zoom in
Previous page
1/32
Next page
20
ITA
COLLEGAMENTI ALTOPARLANTI
- Nel funzionamento a 2 canali (un altoparlante connesso a ciascun canale dell´amplificatore)
l´impedenza di ciascun altoparlante non deve essere inferiore a 2 ohm.
- Nel funzionamento a ponte in mono (2 uscite dell´amplificatore combinate) l´impedenza non
essere inferiore a 4 ohm.
- Non collegare mai i cavi altoparlanti alla massa della carrozzeria o al +12V.
Se l’amplificatore viene fatto funzionare con valori terminali bassi o in modo sbagliato ciò può portare
al danneggiamento sia dello stesso amplificatore che anche degli altoparlanti. In questo caso la garanzia
non é più valida.
USCITA PER IL COLLEGAMENTO DI AMPLIFICATORI AGGIUNTIVI
Il segnale di ingresso sui connettori INPUT (Fig. 1,4) sarà indirizzato, in stereo, ai connecttori OUTPUT
(Fig. 1, 3) per permettere di collegare amplificatori aggiuntivi.
ELEMENTI DI COMANDO
La sensibilità d’ingresso può essere adattata ad ogni autoradio o ad ogni sorgente. Ruotare
il regolatore di volume audio della radio sulla posizione centrale e regolare poi il regolatore del livello
d’ingresso (Fig. 1,5) in modo tale da ottenere un volume audio medio. Con questa regolazione
si ottiene una prestazione con riserva di potenza in presenza di un rapporto segnale rumore ottimale.
SENSIBILITÀ D’INGRESSO
Se l´amplificatore è impiegato per pilotare un subwoofer, posizionare lo switch (Fig. 1, 6) in posizione
"LP". Impostare la frequenza di crossover desiderata impiegando il controllo apposito (Fig. 1, 8). In
questo modo solo le frequenze inferiori a quella impostata saranna amplifcate ed il subwoofer suonerà
in modo più preciso ed efficente.
FILTRO PASSA BASSO REGOLABILE
Se l´amplificatore è impiegato per pilotare altoparlanti posizionare lo switch (Fig. 1,6) in posizione "HP".
Impostate la frequenza di crossover desirata impiegando il controllo apposito (Fig.1, 7). Questo minimizza
la distorsione e l´eccesso di potenza alle frequenze inferiori. Un buon punto di inizio è impostare 125Hz.
Per altoparlanti di dimensioni maggiori, posizionate lo switch (fig 1,6) nella posozione ”FULL”. In questa
configurazione il controllo high pass (Fig.1, 7) è disabilitato.
FILTRO PASSA ALTO REGOLABILE
Mediante il controllo basse boost (fig 1,9) avete la possibilità di regolare il livello dei bassi da 0 a 12dB
a 45Hz.
BASS BOOST REGOLABILE
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crunch GTi2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crunch GTi2100 in the language / languages: English, German as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info