498264
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
ENG
POWER SUPPLY AND TURN ON CONNECTION (FIG. 2)
(1) GND terminal for the ground
(2) REMOTE terminal for the turn on connection
(3) +12 V terminal for the positive-connection of the battery
(4) Vehicle’s battery
(5) In-Line Fuse (not included in the scope of delivery)
(6) Turn on wire from the headunit or the electrical antenna
(7) Fuse(s)
FIGURES (P. 28-30)
The POWER-LED (fig. 1,1) lits up, if the amplifier is in operation.
The PROTECT-LED (fig. 1, 10) lits up, when the amplifier is overheated, or a short circuit occurs resp.
a too low impedance load is connected to the speaker outputs. If this events, the internal built-in
protection circuit shuts down the amplifier automatically. The amplifier should work again properly after
you have solved the problems.
PROTECTION CIRCUIT
CONNECTIONS AND CONTROLLERS (FIG. 1)
(1) Power-LED
(2) Optional High Level Input for the speaker outputs of your headunit
(3) Audio signal outputs to run additional amplifiers
(4) Audio signal inputs
(5) Gain level controller
(6) Selector LP (Lowpass) / FULL / HP (Highpass)
(7) Highpass filter controller
(8) Lowpass filter controller
(9) Bass Boost controller
(10) Protect-LED
The High Level Input is suitable to connect the amplifier inputs with speaker wires, if your headunit is
not equipped with pre-amplifier RCA outputs. Extend therefor every regarding speaker cable from your
headunit with appropriate speaker cables from your car audio retailer to the mounting location of the
amplifier. Then connect the each matching loudspeaker cable with the cables of the included HIGH
LEVEL INPUT jack like described below. Please ensure that a ground cable (black cable, GND) for
each HIGH LEVEL INPUT connector must be connected, which you can branch from the ground terminal
of the amplifier (GND).
NOTE: Never use the High Level Input and the RCA inputs at the same time. This may damage the
amplifier seriously. The loudspeaker cables of the HIGH LEVEL INPUT must have no contact to the
ground (GND) by any means.
+
-
grey = speaker - right - positive
-
+
brown = speaker - right - negative
black = ground connection (GND)
white = speaker - left - negative
green = speaker - left - positive
HIGH LEVEL INPUT
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crunch GTi2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crunch GTi2100 in the language / languages: English, German as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info