750309

Crivit IAN 97694 Inshore 335 Manual

36
Zoom out
Zoom in
Previous page
1/38
Next page
38 GB
2. To deflate the side chambers / screw the
valves completely from their base mountings.
Kit bag
A kit bag is included with this article in which
the kayak is stowed away for transport and
storage. In order to close this, please use the
200cm rope. The kit bag is also useful when
afloat for the splash-proof safekeeping of provi-
sions, clothes etc. Please remember that this bag
is not watertight. For this reason, do not store
sensitive objects in it, for example, cameras.
For use aboard it is advisable to remove the
rope and to flatten and roll up the upper end,
closing it when necessary with the hook and
loop fastener.
Storage bag
A splash-proof storage bag is also included
which can be attached to the back of the front
seat using the hook and loop fastener.
Small objects can be stowed away here to keep
them dry but please remember that this bag too
is not completely watertight. Please do not store
sensitive objects here.
Transport
Always transport the kayak with two adults and
use the carrying straps at the front and back
of the craft.
Care / Maintenance / Storage
WARNING!
Only use care products that do not
contain traces of acids or petroleum and
never use silicone-based products.
1. Clean your kayak thoroughly after every use
with fresh water and mild soap to remove salt
crystals, sandy granules and other small dirt
particles. Leave it to dry completely.
2. Lay both of the upper side pipes into the
inside of the kayak and fold them together
carefully.
3. Store your kayak in a clean and dry place
away from direct sunlight and somewhere
where there are no great temperature
fluctuations. Pay attention to the fact, that the
kayak is not wrinkled but lays flat, and keep
well out of the reach of rodents.
Repairs
WARNING!
You should not attempt to repair large
damaged sections by yourself.
You can repair small areas with the enclosed
repair kit .
1. Deflate the kayak completely and clean the
area to be repaired with an alcohol-based
solution. Roughen up the damaged area
surrounding the hole or tear with a fine sand
paper.
2. Cut a patch to cover the damaged area. The
patch should overlap the damaged area by at
least 1.25cm on all sides.
3. Apply the glue to the kayak as well as to the
patch. Allow to dry for approx. 3 minutes.
4. Press the patch down firmly using a soft
object. Make sure that you are working on a
flat, even surface. Remove any air bubbles
with a rounded object, gently pushing the
bubbles in an outward direction.
5. Always wait at least 12 hours after a repair
before pumping up the kayak once again.
Disposal
Please dispose of the product and packaging in
an environmentally friendly manner, separating
different materials for recycling as required!
Dispose of this item through an authorised
disposal company or through your local waste
disposal facilities - ask your local authority for
information if further guidance is required.
Ensure that you comply with all regulations
currently in force.
… 36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crivit IAN 97694 Inshore 335 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crivit IAN 97694 Inshore 335 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info