460639

Cresta WI930 Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
OPERATING INSTRUCTIONS WI-930
CONTROL LOCATIONS
1. TIME SET BUTTON
2. ALARM SET BUTTON
3. DATE SET BUTTON
4. C/F BUTTON
5. MINUTE /DAY BUTTON
6. HOUR/MONTH BUTTON
7. ALARM ON/OFF SWITCH
8. MODE SELECT- ALARM /
DATE/ TEMP SWITCH
9. SNOOZE BUTTON
POWER SUPPLY
Your clock is designed to operate on alternating
220 Volts 50 Hz power supply.
SETTING THE TIME
HOUR SETTING:
Hold the TIME SET button (1)
and press the HOUR/MONTH button (6) to your
desired hour.
Pressing HOUR/MONTH button (6) for more than 1
second for auto-advancing.
MINUTE SETTING:
Hold the TIME SET button
(1) again, press the MINUTE/DAY button
(5) to your desired minute .
Pressing MINUTE/DAY button (5) for more than 1
second for auto-advancing.
YEAR SETTING:
Hold the DATE SET button (3)
and press the SNOOZE button (9) to your desired
year.
Pressing SNOOZE button (9) for more than 1 second
for auto-advancing.
MONTH SETTING:
Hold the DATE SET button (3) and press the HOUR/MONTH button (6) to your
desired month.
Pressing HOUR/MONTH button (6) for more than 1 second for auto-advancing.
DATE SETTING:
Hold the DATE SET button (3) and press the MINUTE/DAY button (5) to your desired
day. The day of the week will set automatically during this step.
Pressing MINUTE/DAY button (5) for more than 1 second for auto-advancing.
SETTING THE ALARM
HOUR SETTING:
Hold the ALARM SET button (2) and press HOUR/MONTH button (6) to your desired
hour.
MINUTE SETTING:
Hold the ALARM SET button (2) again, press the MINUTE /DAY button (5) to your
desired minute.
ALARM AND SNOOZE FUNCTION
Slide the ALARM ON/OFF switch (7) to ALARM ON position, Alarm indicator appears.
When the preset alarm time is reached, the alarm sounds for 5 minutes and the Alarm indicator flashes.
Press the SNOOZE button (9) to activate the snooze function, the snooze indicator flashes and stop the
alarm sound.
The alarm will sound again after 9 minutes and repeat for 1 hour.
To stop the alarm, move ALARM ON/OFF switch (7) to ALARM OFF position.
SELECTION OF DISPLAY MODE ( ALARM / DATE / TEMP )
Slide the ALARM /DATE /TEMP switch (8) to ALARM position to show the alarm time on the lower display.
Slide the ALARM /DATE /TEMP switch (8) to DATE position to show the calendar day on the lower display.
Slide the ALARM /DATE /TEMP switch (8) to TEMP position to show the temperature reading on the lower
display.
SELECTION OF TEMPERATURE DISPLAY FORMAT
(CELSIUS OR FAHRENHEIT)
Slide the ALARM /DATE /TEMP switch (8) to TEMP position and press the C/F button (4) to show the
temperature reading in either Celsius or Fahrenheit scale.
BATTERY BACK-UP
In the event of a power failure, this unit will automatically switch to a battery stand-by circuit when a battery
is installed. Open the BATTERY COMPARTMENT on the bottom of the unit and install three “AAA” batteries.
Under battery operation, the clock will keep the time running and the alarm will sound at the preset time.
Only the clock display will not light to save battery energy.
WARNING
• The apparatus shall not be exposed to dropping or splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.
• The mains plug shall remain readily operable when the plug is connected into a power outlet.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cresta WI930 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cresta WI930 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info