498190
2
Zoom out
Zoom in
Previous page
1/2
Next page
Using your Machine
STEP 5
On-Off / Selecting a programme...
To change a programme...
NOTE:
Progress indicator lights...
‘OFF’ position
Run indicator light
Door Locked indicator light
M Stop/Change Programme
Start button
Programme selector dial
Option buttons
End light
The machine is switched on, by turning the programme selector dial away from the OFF position to your selected programme.
To start the programme press and release the Start button.
NOTE: When the programme has finished, return the programme selector dial to the OFF position.
If you want to change
a programme, turn the programme selector dial to M (Stop/Change Programme) and press the Start button.
As you turn the programme selector dial the Run light will flash.The flashing stops and the Run light will go out when you press
the ‘Start’ button. The ‘End light will then flash as the machine pumps out the water in the drum to a safe level.When completed,
the ‘End light stops flashing and you can then change the programme (you may need to add detergent).Press the Start button to
continue.
To stop a programme...
To stop a programme, turn the programme selector dial to M (Stop/Change Programme) and press the Start button. As you turn
the programme selector dial the Run light will flash.The flashing stops and the Run light will go out when you press the Start
button.The ‘End light will then flash as the machine pumps out the water in the drum to a safe level.When the End light stops
flashing and the Door Locked indicator light goes out, you can open the door.
CAUTION: The load and the remaining water in the drum may still be extremely hot.
If you turn the programme selector dial during a programme, the Run indicator light will flash to show that the programme
running is not that shown on the dial. Turn the dial to the original programme to stop the flashing.
The flashing will automatically stop when the programme enters the rinse phase.
The ‘Run indicator light will come on as soon as the
selected programme has started. This light will remain lit
throughout the programme and will go out when the
programme has finished.
The ‘End indicator light will come on after the selected
programme has finished. This light will remain lit until you
return the programme selector dial to its OFF position, or
start another programme.
Door Locked indicator light...
The ‘Door Lockedindicator light will come on two
seconds after you press the Start button and will stay lit
throughout the programme. A short time after the
programme has finished the indicator light will go out and
you can then open the door.
Selected programmes will not start if the door is not closed
properly, the ‘Door Lockedindicator light will flash to show
this. Push the door shut until you hear the catch click.
WARNINGS:
In the unlikely
event of something
not working, see
Troubleshooting
STEP 8.
When all selections
have been made
press the Start
button.
The ‘End light will
go out and the Run
light will illuminate
to indicate the start
of a programme.
After a short time the Door Locked
indicator light will illuminate.
If you need to cancel a programme once
the machine has started see STEP 5 ‘Using
your Machine’.
A Typical Wash Programme
Turn the programme
selector dial from the
OFF position to the
programme required
(see STEP 4).
The ‘End light will
illuminate to
indicate that the
machine has power.
Sort laundry into
groups by washcare
labels.
Load the machine,
making sure that the
laundry is not
trapped in the door.
Close the door by
pushing it until it
clicks.
2
Select any optional
wash feature(s) that
you may require by
pressing the
appropriate button(s)
(see STEP 6) indicator
lights will show what
you have chosen.
3
During the wash, the
Run’ and ‘Door
Locked indicator light
will remain lit.
When the
programme has
finished the End
and ‘Door
Locked indicator
lights will remain
lit.
After a short time the Door Locked
indicator light will go out. You can
then open the door.
To switch the machine off, return the
programme selector dial to the OFF
position.
The ‘End light will go out.
We also recommend that you switch
off the electricity and water supply.
Add detergent (and
fabric conditioner if
required) to the
dispenser drawer (see
STEP 3).
Refer to the detergent
manufacturers
dosage instructions.
1
7
8
4
WARNINGS:
DO NOT allow
children to play
with the appliance
or tamper with the
controls.
DO NOT overload
the appliance!
It may damage the
laundry and reduce
the quality of the
wash.
DO NOT try to
open the door
when the Door
Locked indicator
light is on.
During the wash
cycle, remember
that the door glass
may become hot to
the touch.
DO NOT open the
dispenser drawer
during any
programme.
6
STEP 7
If you stop a
programme part
way through a
wash or there is a
power cut, take
care when opening
the door, the
machine may
contain hot water.
(Model W220VW
only):
Reduce the spin
speed if you wish by
turning the variable
spin speed control
dial (see STEP 6).
5
Programme Selector Dial
IMPORTANT INFORMATION: The temperature of the incoming water supply and selection of any Optional Wash Feature, ie. Energy
Save, will affect the programme times*. Turn the programme selector dial from ‘OFF’ to the programme you need...
NOTE:
When the programme
has finished, return
the programme
selector dial to the
‘OFF’ position.
WEIGHT OF
WASH LOAD
Two examples of
maximum wash loads
for different types of
fabric:
2 Bath Towels
5 Shirts
6 Blouses
1 Pair of Pyjamas
4 Items of
Underwear
COTTON
= 5.5kg
2 Childrens Dresses
4 Shirts
4 Blouses
1 Pair of Pyjamas
4 Items of
Underwear
SYNTHETIC
= 3kg
Wash Fabric Temp. Max. Approximate Spin
label ˚C dry load programme time* speed
Prewash 30 5.5kg Slow
White cotton & linen
without special finishes 95 5.5kg Fast
Colourfast cotton 2 hours -
without special finishes. 60 5.5kg 2 hours 20minutes Fast
Non-colourfast cotton, linen
or viscose without special 40 5.5kg 1 hours 30minutes - Fast
finishes 1 hours 45minutes
Non-colourfast cotton, 1 hour 20minutes -
linen or viscose 30 5.5kg 1 hour 35minutes Fast
Synthetics
coloured nylon, polyester,
acrylic and cotton mixtures,
cotton or viscose with special
finishes, coloured polyester 1 hour 5minutes -
and cotton mixtures 50 3kg 1 hour 15 minutes Slow
Acrylics
acrylics and tri-acetate blends
of these fabrics with wool,
polyester and wool blends 40 3kg 40 - 50minutes Slow
Wool
Shrink resistant machine 1 hour 15minutes -
washable wool, woollen 40 1.5kg 1 hour 25minutes Medium
blankets.
Wool mixtures with cotton 1 hour 15minutes -
or rayon. 40 2.5kg 1 hour 25minutes Medium
Silk 55minutes -
Printed acetate 30 3kg 1 hour 5minutes Slow
Fast Wash for freshening up
lightly soiled items. 35 1kg 35 - 45minutes Slow
Warning: not for woollen,
silk or delicate items.
Cold wash 45minutes -
cold fill only, no heating action. 25 3kg 55minutes Slow
Stop/Change programme
Rinse and Spin 3kg 30minutes Slow
Fast Spin - Cotton 5.5kg 15minutes Fast
Slow Spin - Delicates 3kg 15minutes Slow
A
B
C
D
E
F
G
H
J
K
L
M
STEP 4
Pre-wash
Rinse and Spin Programme
Spin only Programmes
Wash Programmes
1 hour 40minutes -
1 hour 50minutes
25 minutes
Options
STEP 6
Button Selection:
To select an option, press the button and you will see a light come on above the button.
Press again to cancel, and the light will go out.
You cannot alter the options once the machine is running.
Energy Save...
use this option to...
Save money and energy on lightly soiled loads.
This option reduces the wash temperatures by 10˚C on
programmes B,C,D,F,G and H.
Rinse Hold... use this option to...
Hold the clothes in the final rinse water, keeping them fresh
until you are ready to complete the programme.
Complete the final spin by pressing the Rinse Hold button when
the light is flashing.
This is not available with programmes A, H and L or Spin
only programmes.
NOTE: Remember to cancel buttons after use!
Automatic Features...
Unbalanced load warning
Your machine has an inbuilt feature to prevent it spinning with an unbalanced load. This will minimise excessive vibration and
prolong the life of the machine. Before each spin the machine ‘senses the load within the drum and if the machine considers the
load to be unbalanced, it will not
automatically spin. Instead the machine will try to redistribute the load to achieve balance by
tumbling backwards and forwards. If it is unable to balance the load after the fifth attempt the machine will abort the spin process
and the load will still be wet at the end of the programme.
If this safety feature is encountered you can spin the load after first opening the door, redistributing the load and selecting a fast or
slow, spin only programme. In the case of small loads or single items you may try adding some extra items of a comparable size to
help balance the load.
Variable Spin Speed
Use this control to reduce the programme spin
speed only.
If you leave this dial in the maximum position,
the spin speed will be the maximum which is
appropriate for whatever wash programme you
have chosen.
When the programme has finished, return the
dial to the original setting.
Note: You cannot alter the spin speed while
the machine is spinning.
Only available on model W220VW.
Is your water pressure too
high?
Troubleshooting - More ‘Troubleshooting information and general product advice can be found on our website, visit: www.theservicecentre.co.uk/help
If your machine is still not working
contact:
Repair Service and Information Desk
UK 08709 066 066
Republic of Ireland 1850302 200
You will be asked for the following
details: Name and Address, Post
Code,Telephone Number, Date of
Purchase, Colour and Model/Serial
Numbers - which can be found on
the inside of the door.
Clear and precise details of the query
or fault.
Remember, you will be charged for a
service call if a problem with your
machine is caused by incorrect
installation or misuse.
Check all loose items, such as
coins, have been removed
from the laundry.
Have both transit bolts been
removed from the machine?
See STEP 2: Installation
Is the fuse in the plug OK?
Has the polystyrene
block been
removed from
underneath the
machine?
MY MACHINE MAKES A
NOISE OR VIBRATES IN A
SPIN PROGRAMME.
Plug the machine in and
turn the socket switch on.
If possible use another socket
for the machine.
If not replace it, see STEP 1:
Electricity Supply
Is the standpipe or household
drain blocked.
Have you adjusted the feet to
stabilise the machine?
Check the feet have been
levelled.
Is steam coming
from the dispenser
drawer?
If not tighten them.
Does the washer need
replacing?
Close the door. Choose a
programme and then press ‘Start
Does the ‘Door Locked’ indicator
light come on after 2 seconds?
MY MACHINE WILL NOT
START
MY MACHINE IS LEAKING
THE PROGRAMME TAKES A
LONG TIME
SUDS ARE COMING FROM
THE DISPENSER DRAWER
NOT ALL OF THE DETERGENT
HAS BEEN FLUSHED AWAY
Is the machine plugged in
and switched on?
Is the socket OK? Test with
another appliance to check.
The machine is designed to
release steam from the dispenser
drawer during hot washes.
You may need to call in a
plumber.
Turn the main supply tap
down.
You may need a cold fill adaptor
to run your machine as cold fill
only. See ‘Installation, STEP 2.
If you have fitted a detergent flap
ensure it is in the UP position if
using powder. See STEP 3:The
Dispenser Drawer
Is your hot water pressure low?
Check the inlet hoses are not
kinked.
Check that your water supply
taps are turned on fully.
Was a short spin programme
used on a non-synthetic load.
Did the water pump out?
If not see MY MACHINE DOES
NOT PUMP OUT WATER’.
Clean fabric dispenser drawer.
See STEP 3:The Dispenser
Drawer’.
Check for low temperature and
low pressure of the hot and
cold water supply.
THE DISPENSER WILL NOT
CLOSE PROPERLY
Check the correct amount of
suitable detergent has been used,
refer to manufacturer’s
recommendations.
If you have used the wrong type of
detergent, select a Rinse programme
to flush out your machine.
There has been an
unbalanced load and the machine
could not spin.
See ‘Automatic Features’ STEP 6.
MY LAUNDRY HAS NOT
SPUN DRY.
WATER COLLECTS IN THE
FABRIC DISPENSER
COMPARTMENT
Clean the dispenser drawer, see
STEP 3:The Dispenser Drawer
Is the drawer clogged with
detergent?
The ‘Door Lockedindicator light:
Check the drawer is properly
aligned.
Washcare Tips:
Indicator Lights:
Do not overload the machine
(maximum load 5.5kg).
In addition to reducing the
quality of the wash, this may also
damage your laundry and the
machine.
We strongly recommend that you
do not wash underwired bras in
this machine. Should the wires
become detached it could cause
damage to your clothes and the
machine. If the washcare label
states that the bra is machine
washable, then we advise placing
it in a sealed pillow case or a
similar washbag. Remember,you
will be charged for a service call
resulting from a detached bra
wire.
Do not use the machine if the
item to be washed does not have
a wash label.
Before washing laundry we
recommend that you do the
following:
Pre-treat awkward stains with
washable treatments.
Do not wash any items that have
previously been treated with
solvents.
Close zips, fasten belts, tie strings
and close press studs to prevent
tangling.
Empty ALL objects from pockets
as they may damage the clothes
and the machine.
Remember, you will be charged
for a service call to rectify a
malfunction resulting from
objects, such as coins, pens, hair
grips etc. falling from pockets.
Limit the size of absorbent loads
ie. towels, to 3kg (7lb) to give
good washing and rinsing results.
Place small items in a wash bag.
Always follow the care label on
items when choosing the wash
programme.
Wash non-colourfast items or
really dirty laundry separately as
they may affect other items.
Are the fill hoses on correctly?
If the Door Lockedindicator light is flashing:
Shut the door firmly, until it clicks.
The ‘Door Lockedindicator light should now stay on.
If the door will not open... Check the programme has
finished, is the End indicator light lit? It takes about
two minutes for the Door Locked indicator light to
go out after a programme has finished.
The door will not open until the Door Locked
indicator light has gone out.
The ‘Run’ and ‘End indicator lights are
both flashing...
This means that the machine cannot fill.
Check that the water supply is turned on and that the
inlet hoses are not kinked.
The ‘Run indicator light is flashing...
If the Runindicator light is flashing:
This means that the programme selector dial has been
moved since the programme started.
Return the dial to the original selection.
STEP 8
Remember, you will be charged for a service call for problems caused by incorrect installation, non-removal of transit bolts or packaging, leaks from household pipework, loose or blocked fill and drain hoses.
Washing items that DO NOT have a wash label or washing items that are not intended as machine washable and NOT emptying contents from pockets may cause pump or drain blockages, or may damage components within the machine.
See STEP 2: Installation
Clear any blockages that have
been found
MY MACHINE DOES NOT
PUMP OUT WATER
Is the machine connected to
a sink waste system?
Check the blocked end of the
under sink drainage unit has
been cut off.
Has ‘Rinse Hold’ been selected?
The light will flash until the button
is pressed again.
Press the ‘Rinse Hold’ button
again.
Are the drainage unit, standpipe
or under sink connections free
from blockages?
Has the drain hose been installed
correctly? Ensure it is not blocked
or kinked.
The ‘Rinse Hold’ button has
been pressed,this will hold
laundry in the final rinse water,
until the button is pressed
again.
MY MACHINE STOPS
BEFORE A SPIN
PROGRAMME.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creda W200FW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creda W200FW in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info