651228
32
Zoom out
Zoom in
Previous page
1/34
Next page
Troubleshooting and Support
This section provides solutions to problems you may encounter during installation or normal use. This
includes:
l Problems with Sound
l Problems with Simultaneous Playback/Recording
Problems with Sound
No sound from the headphones.
Check the following:
l The headphones are connected to the Headphone jack.
l In the speakers and headphone selection of Sound Blaster Omni Control Panel, the Headphones
option is selected.
No audio output when playing digital files such as WAV, MIDI files or AVI clips.
Check the following:
l The speakers' volume control knob, if any, is set at mid-range. Adjust the volume mixer settings in
Sound Blaster Omni Control Panel, if necessary.
l The powered speakers or external amplifier are connected to the Line Out jacks.
l The speakers and headphone selection in Sound Blaster Omni Control Panel corresponds to your
speaker or headphone configuration.
No audio can be heard from the source connected to Line-In or Mic-In jack, or the
Internal Microphone Array.
Do the following:
l In the Mixer selection of Sound Blaster Omni Control Panel, unmute the Line-In or Mic-In/Mic
Array from Playback option.
No audio can be recorded from the source connected to Line-In or Mic-In jack, or
the Internal Microphone Array.
Do the following:
i. Navigate to Windows Control Panel > Sound > Recording tab.
ii. Select Line-In or Mic-In/Mic Array as the default recording device.
iii. In the Mixer selection of Sound Blaster Omni Control Panel, unmute the Line-In or Mic-In/Mic
Array from REC option.
Problems with Simultaneous Playback/Recording
An error message appears when recording and playing back simultaneously.
This may occur due to data transfer limitations if your computer is using a USB 1.1 connection. It may
not be possible to play back, or simultaneously record and play back, content at the highest bit rate
and/or frequency supported (24-bit, 96 kHz). Select lower bit depth and sampling rates for reduced CPU
consumption and lower USB bandwidth requirements. Select lower settings if you encounter
performance problems or if you run out of USB bandwidth. Lower sampling and bit depth rates,
however, usually result in lower audio quality.
This should not be a problem if you are using a USB 2.0 connection.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Creative Sound Blaster Omni Surround 5.1 - SB1560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Creative Sound Blaster Omni Surround 5.1 - SB1560 in the language / languages: English as an attachment in your email.

The manual is 6,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Creative Sound Blaster Omni Surround 5.1 - SB1560

Creative Sound Blaster Omni Surround 5.1 - SB1560 User Manual - German - 34 pages

Creative Sound Blaster Omni Surround 5.1 - SB1560 User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info