506239
1
Zoom out
Zoom in
Previous page
1/2
Next page
spindle
q'
r
Bushing
Seal
Cartridge
Ball Bearing
131
Screw
Rubber End Plug
Snap Ring
Pedal Body
CRANK BROTHERS
(
Egg Beater
CRANK
4 Sided Clipless Pedal
BROTHERS
Cleat with 2 circles
I k
I k
I
I
k
I 1
I
Ir..
6° FLOAT
15° EARLY RELEASE ANGLE
20° DEGREE RELEASE ANGLE
CRANK
BROTHERS
WARRANTY
Crank Brothers pedals are warranted against defects in workmanship for 2 years (twice most
others!) from the date of purchase. Your receipt will be required as proof of any warranty
claims. Contact Crank Brothers directly for warranty at 949-464-9916 or
Crankbros@aol.com
. This warranty is limited to the repair or replacement of this product.
Crank Brothers at its option will either repair or replace any defective parts. This warranty
does not cover damage caused by rider errors. However, we at Crank brothers are
reasonable people and we believe in our product, so if you can give us a reasonable
explanation, we'll fix or replace even your rider error damaged pedals.
CAUTION
PLEASE READ THIS BEFORE YOU RIDE
Before riding, study carefully how the locking mechanism of the Egg Beater works. Place one foot
on smooth level ground and practice engaging and disengaging from each pedal numerous times.
Even
if
you are experienced with clipless pedals, all clipless pedals take some practice. Get used
to them before riding.
Clipless pedals require special bicycle shoes. The Egg Beater road Cleats are compatible with all
standard SPD® road shoes.
Use only Egg Beater cleats with Egg Beater pedals.
Inspect the cleats and rubber pads regularly and replace them when they are worn out.
If the cleats are not installed correctly, you could experience knee damage. Note that some
people's legs are not symmetric so be sure that both cleats are adjusted correctly for your body.
We suggest you consult your local bike shop for a pedal fit specialist.
The Egg Beater pedal is so low profile compared to most other pedals that you may need to lower
your seat slightly.
For more information regarding the mounting of the pedals, their use, or maintenance, please go to
your authorized dealer or call Crank Brothers. Always use a helmet and follow the rules of the road
when cycling. Always use proper headlights and taillights when riding at times of reduced visibility.
CRANK BROTHERS
Ph: 949-464-9916 Fax: 949-376-7010
Email: crankbros@aol.com
www.crankbros.com
rev A
FEATURES
Egg Beater pedals are the world's first 4-sided pedals. The design allows you to clip in in
a variety of ways not possible with other pedals. Additionally, Egg Beaters are very light,
extremely mud resistant, durable, have 6 degrees of rotational float, and are easily rebuilt.
PEDAL INSTALLATION
Egg Beater pedals have both a 6mm (or 8mm) Hex and 15mm wrench flats. Use
whichever is more convenient for you. Note that the right pedal has a standard right-
handed thread and the left pedal has a left-handed thread. The right pedal has a small "R"
stamped in the spindle and the left pedal has a smal! "L" stamped in the spindle.
Grease the threads and then tighten the pedals to 25 to 30 foot pounds torque (34 to
41Nm) with either a Hex or a 15mm wrench.
ROAD CLEAT INSTALLATION AND ADJUSTMENT
Egg Beater road cleats are compatible with all standard SPD® road shoes and do not
have a front and back but there is a left and a right cleat that changes the release angle.
Cleat with the two circles on your right shoe means earlier release angle for both shoes.
Cleat with the two circles on your left shoe rneans later release angle for both shoes.
To replace Rubber Pads, cleat must be removed from shoe.
We recommend beginners always start with the cleat with the two circles on the right shoe.
Even some experienced riders prefer this as well.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crank Brothers Egg Beater at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crank Brothers Egg Beater in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info