611234
7
Zoom out
Zoom in
Previous page
1/10
Next page
6
CONVECTION HEATER FEATU
RES
SETTING THE TIMER
1. To use the heater in timed mode, it must be permanently connected to the power
supply. If the power is disconnected, the clock will stop.
2. To operate the heater in timed mode, the red switch within the dial should be in
the center position (HEAT + TIMER). If it is in the left position (HEAT ON), the
heater will be permanently ON. If it is in the right position (HEAT OFF), the
heater will be completely OFF.
3. The numbers around the timer dial show the time in 12-hour AM/PM sets. White
numbering goes from 1:00 AM - 12:00 PM, red numbering goes from 1:00 PM -
12:00 AM. The timer is controlled by the red/white plastic segments. One single
segment represents 15 minutes. Push the segment(s) away from the center of
the dial for the heater to turn ON for that time period. Push the segments toward
the center dial for the heater to turn OFF for that time period.
4. Rotate the dial clockwise until the arrowhead (to the left of the red switch on the
dial) points to the current time.
FOR EXAMPLE: To set the timer to turn on at 1:00pm and turn off at 3:00pm,
set the red switch to the center position (HEAT + TIMER). Push the red
segments away between 1:00 PM and 3:00 PM on the dial. Make sure the
arrowhead is pointing toward the current time. The heater will automatically turn
on at 1:00 PM and turn off at 3:00 PM.
INDICATOR LIGHT
This heater has an indicator light below the thermostat (see parts page) which turns on
to indicate when the heater is switched on and plugged into a power outlet. When the
heater is unplugged from the power source the indicator light will turn off.
OVERHEAT PROTECTION
The heater has an internal, over-heating safety device which automatically switches the
heater off if an over-heat situation is detected. If this should occur, unplug the
appliance and wait until the unit cools off. Once the unit has fully cooled, you can switch
it on again.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crane EE-8068 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crane EE-8068 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info