611238
6
Zoom out
Zoom in
Previous page
1/9
Next page
5
1. Place the fan on the floor in the desired location.
2. Ensure that the fan’s Power is Off.
3. Plug the fan into a 120V AC outlet. This fan has a
polarized plug ((one blade is wider than the other). As a
safety feature to reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
4. Choose your desired setting (below) and enjoy your new fan.
ON/OFF (Stand-By) Button
To turn the unit power on, press the key to turn on the power indicating light. The
unit starts operation at low. Pressing the key again will stop the unit and the power
indicating light will be off.
Mode Button
While the unit is on, press the key and choose Normal, Natural or Sleep mode.
Speed Button
While the unit is on, press the key and it will change the speed of the fan. This
will cycle from low, medium and high.
Timer Button
When the unit is on, press the key. You can choose between 0.5 and 8 hours. Each
press of the key will increase the timer by 0.5 hours. At the same time, the display
window will show the time of your setting. The unit will turn off automatically according
to your set time.
Oscillation Button
While the unit is on, press the key and it will turn left or right automatically. At the
same time, the LED indicator will be on. Pressing the key again will stop the oscillation
and turn off the LED light.
Remote Control Operation
There are 5 buttons on the remote control. Their function is equivalent to the functions
of the touch sensors on the control panel of the device. If you wish to use the remote
control, point the remote control at approximately the level of the control panel with the
display. The maximum signal range of the remote control is 6 meters. If you place the
remote in such a way that the transmission of the signal is blocked by barrier, the signal
may not be transmitted at all.
OPERATION AND USE
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Crane EE-5610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Crane EE-5610 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info