667147
5
Zoom out
Zoom in
Previous page
1/8
Next page
user instructions TWIN80C_EN
5
Outdoor sensor
An outdoor temperature sensor (heating) must be an NTC with a resistance of 12kOhm at 25°C
(connected to terminals (3) and (4) of the green connector block)
Letter Description Range Factory settings
O/b (3) Basic temperature (outdoor sensor) 10°C – 70°C 40°C (4)
O/S (3) Slope (outdoor sensor) 1- 100 20 (4)
O/d (3) Day reference temperature (outdoor sensor) 0°C – 70°C 40°C (4)
Note: (3) Active when an outside sensor is connected, Note: (4) does not return to factory settings
Adjustment heating curve (in case of an outdoor temperature sensor)
By pressing the set/reset button in for longer than 5 seconds, you go to the ‘mode’ menu.
To change the subsequent "Letter in menu" parameter, the user must press the Set/Reset button.
To change the “Range” setting in the parameter, the user must press the “+” or the “–“ button.
Parameter „C“
The setting in the menu „C“ makes the maximal heating flow
temperature (default 82°C).
O/b-value: The setting of the minimal Heating flow temperature
(value in °C).
O/S-value : The setting for the sloop of the curve.
( change of Flow temperature depending on the change of the
outside temperature).
O/d-value : The setting of the flow temperature at an outside
temperature of 20°C (value in °C).
Letter in menu
Description
Range
default
C Max. Flowtemp. for heating 25 –90 °C 82 °C
O/b Basic temperature 10 –70 °C 20 °C
O/S Slope 1 – 100 20
O/d Flow temperature at outside = 20°C 0 –70 °C 20 °C
O/S=20 [default]
Parameter C=82°C [default]
Outside temperature [°C]
Supply temperature [°C]
O/d=20°C [default]
O/b=20°C [default]
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Coopra TWIN80C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Coopra TWIN80C in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info