Manual Constructa cd 53030 (page 66 of 68) (English, German, Dutch, French, Italian)

130679

Zoom out

Zoom in

1/68

Preparing the wall cupboard

Installation inside the wall

cupboard

3. Align and screw on the enclosed

mounting rails.

ṇNote the thickness of the sides of the

cupboard (16 mm or 19 mm).

dimension X.

1. Remove the ﬁlter frames (see Operating

Manual).

2. If the hinges are no longer accessible

when the extractor hood has been

installed, align the cupboard doors.

3. Lift and push the extractor hood from

below into the cupboard until the

installation aids on the left and right lock

into position.

ṇIf the interior depth of the cupboard is

less than 280 mm, the 250 mm high rear

panel must be removed.

4. Pull out the ﬁlter drawer all the way.

5. Attach the extractor hood by screwing

in 2 screws on the left and right. Do

NOT tighten the screws. Raise the

extractor hood.

6. Align the extractor hood in the

cupboard and tighten the screws.

x=16mm x=19mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Constructa cd 53030 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Constructa cd 53030 Manual

Product: