699469
4
Zoom out
Zoom in
Previous page
1/6
Next page
7. Press the “UP” button repeatedly until the desired weekday setting (weekday or weekday combination)
is displayed. The weekday settings are displayed in the following order:
MO → TU → WE → TH → FR → SA → SU
→ MO TU WE TH FR → SA SU → MO TU WE TH FR SA
→ MO WE FR → TU TH SA → MO TU WE → TH FR SA
→ MO TU WE TH FR SA SU
8. Press the “PROG” button to conrm your selection and to set the off time for the rst program. The
display will show “OFF” (off). Set the turn-off time according to the instructions provided in steps 2 to 8.
9. Press the “PROG” button to program additional turn-on and turn-off times, or press the “OK” button to
select the clock time mode. If you want to program additional turn-on and turn-off times, proceed as
described in steps 2 to 9.
10. In clock time mode, press the “SET” button to select “AUTO”, “OFF” or “ON” mode. The modes are
displayed in the following order.
AUTO (Power switched on. Timer activated)
→ OFF (Power switched off. Timer deactivated)
→ ON (Power switched on. Timer deactivated)
11. In order to delete a program, press the “PROG” button repeatedly until the desired program is displayed.
You have to delete each turn-on and turn-off time separately. Press the “CLEAR” button to delete the
selected program. The program will be deleted immediately without any conrmation prompt.
c) Random function
If the random function is activated it has priority over programmed turn-on and turn-off times. It is not
necessary to program a period during which the random function will activate. The random function will
activate several times randomly between 18:00 and 6:00 o’clock for a maximum ON/OFF cycle of one hour.
Press the “SET” button to select “AUTO” mode. Simultaneously press the “SET” and “UP” buttons to activate
or deactivate the random function. The display will show “RANDOM” indicating the random function being
activated.
d) Countdown function
This function is intended for a device to turn on or off after a certain time has elapsed. The countdown
function is only available in “ON” and “OFF” modes. In “ON” mode, the power will switch off after the set time
has elapsed. In “OFF” mode, the power will switch on after the set time has elapsed. Set the time to elapse
until switching on or off the power as follows:
1. Connect a device and switch it on.
2. Simultaneously press the “PROG” and “UP” buttons to program the countdown function. The display will
show “COUNTDOWN”. Set the time between 1 minute up to 99 hours and 59 minutes.
3. Press the “SET” button. The ► symbol in front of “HOURS” starts ashing.
4. Press the “UP” button repeatedly until the desired hours are displayed. Press and hold the “UP” button to
quickly scan through the hours. Use this procedure to set the “MINUTES” next.
5. Press the “SET” button. The ► symbol in front of “MINUTES” starts ashing.
6. Press the “UP” button repeatedly until the desired minutes are displayed.
7. Press the “OK” button to start the countdown. “COUNTDOWN” starts ashing and the set time starts
counting backwards in the display.
8. After the set countdown has elapsed, the device will turn on or off depending on the respective operating
mode.
9. Simultaneously press the “PROG” and “UP” buttons to deactivate the countdown function.
e) Resetting the device
In case of malfunctions, if the display does not work properly or if pressing a button does not cause any
response of the device, press the red “RESET” button. In order to do so, use an object with a round tip or
the end of a paper clip. All stored data will be reset. You will have to set the clock time and any programmed
times again.
If the rechargeable battery is not completely discharged and still contains a small amount of
power, the display will not turn on. Connect the timer to a wall socket (230 V/AC, 50 Hz) and
press the “RESET” button to reset the device and to activate the display.
If the built-in battery is completely discharged, connect the timer to a wall socket. The display
will turn on immediately.
Maintenance and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they
can cause damage to the housing and malfunctioning.
Unplug the timer from the wall socket before cleaning.
Never submerge the product in water or other liquids.
There are no user-serviceable parts inside the product. Never open/dismantle the product.
To clean the product, a dry, soft and clean cloth is sufcient. Do not apply too much pressure to the housing
to prevent scratching.
You can easily remove dust using a long-haired, soft and clean brush.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
The built-in battery must be disposed of by a specialist.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable
batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that disposal
in the domestic waste is forbidden. The designations for the heavy metals involved are: Cd =
Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash
icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores
or wherever (rechargeable) batteries are sold.
You thus full your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage ............................. 230 V/AC, 50 Hz
Backup battery .................................. 1 x 2.4 V, 40 mAh NiMH rechargeable battery
Switching power ...............................max. 3680 W
Switching current .............................. max. 16 A
Standby power consumption ............ 0.45 W
Programs .......................................... 16 turn-on and turn-off programs
Setting time ....................................... min. 1 minute, max. 7 days
Time display .....................................24 or 12 hours
Storage/operating temperature ......... 0 to 50° C
Dimensions (W x H x D) ................... 73 x 145 x 80 mm
Weight ..............................................202 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited. This publication represent the technical status at the time of
printing.
© Copyright
2016
by Conrad Electronic SE.
V3_0416_02-HK
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Conrad 618495 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Conrad 618495 in the language / languages: German as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info