670189
1
Zoom out
Zoom in
Previous page
1/3
Next page
CONCEPT2.COM
Page 1
0711
DISASSEMBLING THE CONCEPT2 DYNAMIC INDOOR ROWER
Disassembly Instructions
Disassembly for re-boxing will be easier if you follow these instructions. Please disassemble the machine
into the five subassemblies shown below. The re-boxing procedure requires that these five subassemblies
are intact. They should not be broken down into smaller components.
Foot Carriage
Flywheel Return
Assembly
Shuttle
Channel
Rail Assembly
Front Leg/Monitor Arm Assembly
Rear Foot
Handle
Five Subassemblies
photo A
Step 1:
Unplug the monitor cable from the generator located
on the flywheel assembly under the seat rail. See
photo A. Feed the end up into the rail assembly. See
photo B. Pull the cable out of the rail assembly from
the front. See photo C.
photo B
photo C
Materials Needed: (1) 6 Lobe Driver
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Concept2 Dynamic Indoor Rower at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Concept2 Dynamic Indoor Rower in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Concept2 Dynamic Indoor Rower

Concept2 Dynamic Indoor Rower Installation Guide - English - 12 pages

Concept2 Dynamic Indoor Rower User Manual - English - 16 pages

Concept2 Dynamic Indoor Rower User Manual - English - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info