586406

Comtel CT-2400 Manual

36
Zoom out
Zoom in
Previous page
1/40
Next page
36
short press
short press short press
short press
short
press
OFF
Night light ON
Intensity level 1
vox
Intensity level 3
Night light ON
Intensity level 2
Night light ON
Intensity level 3
3. Once BU is in transmit mode, the transmit indicator 10 will light up red. The
unit will return standby mode a few seconds after the microphone 12 stops
picking up any sound and the transmit indicator 10 goes off.
4. The night light 14 can be set to permanently ON or vox (voice activated) by
short press of the button 11 in following manner:
Under VOX mode, the night light vox indicator 15 will light up. Once the
microphone 12 picks up a sound, the night light 14 will be turned on and will
fade off automatically a few seconds after the microphone 12 stops picking
up any sound.
Parent unit (PU)
1. Switch on the unit by long press of button 1. The power indicator 3 will
show steady green. If this indicator starts flashing green, the battery level
becomes low.
Either replace with new battery or change using the supplied AC adapter as
power supply. (For PU equipped with Li battery, place it inside the supplied
charger stand to charge up the battery).
The LED level meter 4 will show the battery status for around 3 sec whenever
the power is switched on, then it resumes to show the received signal level
from baby unit.
Under normal operation, short press of the button 1 at any time will show the
battery status on the LED level meter 4.
2. Place the PU at a reasonable distance away from BU to avoid feedback. Too
close a distance will create a screeching sound at the speaker 5.
3. Once the PU receives a signal, the LEDs in the level meter 4 will light up.
The louder the baby’s voice, the more number of LED will be lighted up. This
feature is useful to alert the parents of baby’s cry in case the volume of
speaker 5 is turned low to keep the environment quiet,
4. The speaker volume can be adjusted using the button 2. The LED level
meter 4 will show the setting. More LEDs light up means higher volume
(maximum 5 LED).
CT-2400_Manual_04.pdf 36 28/4/14 6:03 pm
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comtel CT-2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comtel CT-2400 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info