521988
1
Zoom out
Zoom in
Previous page
1/4
Next page
Contents:
AIS-2-2000 unit
1m NMEA2000 cable
This manual
Introduction:
The AIS-2-2000 is a high performance, dual channel AIS
receiver, designed for integration into boats using a NMEA
2000 network. Supplied with a NMEA 2000 drop cable for
power and data the unit is quick and easy to install into a new
or existing NMEA 2000 network.
Installation:
The AIS-2-2000 Receiver is not waterproof and should be
located in a dry location. The unit can be secured by suitable
screws in the 4 mounting holes on the end flanges.
Antenna Connection:
The AIS-2-2000 requires connection to an external VHF
antenna to receive data from other vessels.
The AIS VHF antenna should be mounted as high as possible
to achieve the maximum range of reception. If mounted at the
masthead then it should be located the other side of the mast
to the VHF Radio antenna and stood off as far as possible.
You will need a BNC plug, 50 Ohm, to connect the antenna to
the AIS-2-2000 unit.
Alternatively purchase our ASR100 Antenna Splitter which
allows you to share your existing VHF Radio Antenna with the
AIS-2-2000
Power Connection:
The DC power for the AIS-2-2000 is supplied by the NMEA 2000
powered network. This supply should be in the range 9.0 to
16.0 VDC. The Load Equivalent Number (LEN) for this receiver
is 4.
Operation:
The AIS-2-2000 reads and decodes all AIS messages that are
specified and transmitted by other AIS vessels and stations.
These messages are converted to the equivalent NMEA 2000
PGN format and sent out on the network.
On plugging the AIS-2-2000 into the NMEA 2000 network and
applying power the Green LED will light and the two Channel
Red LEDs will come on continuously for approximately 5
seconds then extinguish.
Once the unit has logged onto the Network the Green Data
LED at the rear of the unit will flash to confirm correct
operation.
If you are within range of vessels transmitting AIS data the
two channel Red LEDs will flash intermittently indicating
reception of an AIS message, this data will be sent out on the
NMEA 2000 Network for display on AIS compatible Chart
Plotters, Radars, etc.
www.busse-yachtshop.de | info@busse-yachtshop.de
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comar AIS-2-2000 NMEA 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comar AIS-2-2000 NMEA 2000 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info