535645

Coinco Global 2 Manual

3
Zoom out
Zoom in
Previous page
1/38
Next page
Page 3
800 Series
SECTION 1: GENERAL INFORMATION
Introduction
This manual contains information on installing,
operating and maintaining your COINCO
GLOBAL2
®
coin changer. The manual is
intended for owners, route operators and shop-
level technicians as a primary source of
information. Taking time to read this manual
and becoming familiar with this information
will help you obtain the best performance from
your COINCO GLOBAL2
®
changer.
The COINCO GLOBAL2
®
Changer from Coin
Acceptors can accept and validate up to 32
different coins or tokens. The COINCO
GLOBAL2
®
Changer has the ability to be dual
currency using a built in exchange rate
convertor. It is programmable through a digital
display making it easy to set up a user
configuration. The COINCO GLOBAL2
®
Changer is compatible with current vending
machine protocol standards as follows:
• MDB: For electronic vending machines that
utilizes COINCO’s Multi-Drop Bus
technology.
Note: All Global changers are equipped
with the MDB interface as standard.
• Single-Price/Four-Price: For
electromechanical vending machines.
• Protocol ‘A’ (Executive): For vending
machines equipped with an electronic
Protocol ‘A’ serial interface.
•
Protocol ‘A’ (Executive) with MDB Master:
As above with the additional ability to
interface to MDB Bill validator or MDB
Cashless devices whilst being connected to a
vending machine in protocol ‘A’ mode.
• BDV: For vending machines equipped with
an electronic BDV serial interface.
For Your Records
A label indicating the coin changer model
number and serial number can be found on the
side of the coin changer. Refer to the model and
serial number whenever you call upon your
Coinco Service Centre for information or
service. For your information, the first four
digits of the serial number indicates when the
unit was built which is also the beginning of the
warranty period. The first two digits indicate the
week of manufacture; the third and fourth digits
indicate the year of manufacture. For example,
Serial Number 1503005895 would indicate that
the unit was manufactured in the 15th week of
2003.
The changer model number is shown in the
following format:
AAA–BXXXZ
Where:
AAA The country/currency code. E.g. SEK =
Swedish Krone, GBP = Great Britain
Pound.
B The primary protocol of the changer
G = MDB only
F = Four/Single-price Electromechanical
A = Protocol ‘A’ (Executive)
B = BDV
(Note: All models have MDB in addition
to the primary protocol)
XXX The first digit of the model number
indicates the series of the changer 7, 8 or
9. The last two digits indicates the
changers payout configuration.
Z Indicates any special options.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Coinco Global 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Coinco Global 2 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info